Search found 5 matches

by donnathemazda
June 6th, 2022, 2:43 am
Forum: Mazda 2.3 DISI Turbo
Topic: Base tune and random cut
Replies: 6
Views: 4482

Re: Base tune and random cut

Hahaha, No cargo ship EBCS here, the EBCS is the upgraded corksport unit. A local tuner and I are working on the tune, some of the random values you see are a result of some experimentation with this issue (map and load limits, fuel pressure changes, etc. as you noted before these changes didn’t do...
by donnathemazda
June 2nd, 2022, 9:17 am
Forum: Mazda 2.3 DISI Turbo
Topic: Base tune and random cut
Replies: 6
Views: 4482

Re: Base tune and random cut

Do you think there is a boost leak that we missed? Wastegate malfunction? Or is there something within the tune that would do this other than EBCS? I do not think there's a boost leak, and the MAF cal even though quite choppy is not too far off. However as I mentioned the tune is out of sync in pre...
by donnathemazda
June 2nd, 2022, 8:16 am
Forum: Mazda 2.3 DISI Turbo
Topic: Base tune and random cut
Replies: 6
Views: 4482

Re: Base tune and random cut

Well, there's a pretty big chance you will get random cuts with this tune. Actually they are not cuts, they seem to be very violent wastegate duty cycle corrections. Check with who made this tune for you make sure he really meant putting those numbers in there for the EBCS calibration. Also apart f...
by donnathemazda
May 31st, 2022, 8:36 pm
Forum: Mazda 2.3 DISI Turbo
Topic: Base tune and random cut
Replies: 6
Views: 4482

Base tune and random cut

Current mods: Corksport Cst5, HPFP, FMIC, 3.5" Intake, Downpipe, exhaust DISCLAIMER: CAR WAS WORKING FINE WITH CST4 During drive under wide open throttle, car is not even making wastegate pressure (which should be around 17 lbs). It seems like Absolute Load is low (along with Mass airflow obvio...
by donnathemazda
January 14th, 2021, 4:26 pm
Forum: Gen 1 Tuning
Topic: Methanol tuning
Replies: 1
Views: 2940

Methanol tuning

What exactly needs to be done to make a good methanol tune? What are some things I should look for when datalogging and what should I look at adjusting for methanol?