Search found 128 matches

by Kevin
October 7th, 2017, 1:09 am
Forum: Software Support
Topic: PID values / equations
Replies: 2
Views: 5261

Re: PID values / equations

Hi Ugnius

Thank you for your reply. That is totally understandable :)
by Kevin
October 6th, 2017, 6:00 am
Forum: Software Support
Topic: PID values / equations
Replies: 2
Views: 5261

PID values / equations

Hi Guys Hope you are doing well. Wonder if someone could maybe help me out or point me in the right direction. I'm busy with an Android Application, purely for monitoring and logging. I know I can use Torque with the MS plugin but I have some other features that I want to add for a more automated ex...
by Kevin
September 18th, 2017, 7:32 am
Forum: Mazda 2.3 DISI Turbo
Topic: bosch 3 bar MAP sensor
Replies: 40
Views: 140517

Re: bosch 3 bar MAP sensor

Hi there. Thanks for the reply. We had the owner of the car in question switch the wires around. We found the 2 diagrams online and compared them. Seemed as if they were switched around. After testing the results where the same. But now the AP and onboard bosst gauge does not read boost. Interesting...
by Kevin
September 13th, 2017, 9:08 am
Forum: Mazda 2.3 DISI Turbo
Topic: bosch 3 bar MAP sensor
Replies: 40
Views: 140517

Re: bosch 3 bar MAP sensor

Hi Ugnius

Please see the comparison of boost(bar) vs map voltage in the attached image.
by Kevin
September 13th, 2017, 8:35 am
Forum: Mazda 2.3 DISI Turbo
Topic: bosch 3 bar MAP sensor
Replies: 40
Views: 140517

Re: bosch 3 bar MAP sensor

Hi Ugnius

Thanks for the reply. When I noticed the low value last night I did the calculation and noticed kPa values of around 50kPa. It seems as if the voltage flatlines yes.
by Kevin
September 13th, 2017, 8:02 am
Forum: Mazda 2.3 DISI Turbo
Topic: bosch 3 bar MAP sensor
Replies: 40
Views: 140517

Re: bosch 3 bar MAP sensor

Hi guys. Hope everyone is well. Need some advice regarding the Bosch 3bar 845 MAP sensor. Im helping someone on a different platform (Ive asked Steve alteay and he replied). They soldered harness onto the new map sensor. When logging he is seeing around max 0.9V MAP. Now Steve told me last night tha...
by Kevin
July 3rd, 2013, 12:04 am
Forum: MAZDASPEED6/Mazda 6 MPS Tuning
Topic: LTFT +20 HELP FIND THE ISSUE.
Replies: 2
Views: 8594

Re: LTFT +20 HELP FIND THE ISSUE.

Hey Rix, sounds hectic bud. This might sound very stupid to some but have a look at ur boost gauge at idle. A lower / higher reading than normal will indicate various issues. I think i sent everyone an email about it a few months ago. As far as i can gather, the issue should be after the maf and pre...
by Kevin
June 4th, 2013, 9:58 am
Forum: Gen 2 Tuning
Topic: Timing Tables
Replies: 8
Views: 17237

Re: Timing Tables

Hi there. Still no reply about this?



Smackin a GTI while on my iPhone using Tapatalk
by Kevin
April 19th, 2013, 3:33 am
Forum: MAZDASPEED6/Mazda 6 MPS Tuning
Topic: ignition timing
Replies: 9
Views: 19960

Re: ignition timing

From my general understanding is that u would advance ignition timing after max torque. Timing increases as the rpm increases and decreases as the load increases. U need to check if u are making more power when the timing is changed. If not, then u need to stop advancing. Smackin a GTI while on my i...
by Kevin
April 18th, 2013, 10:14 am
Forum: Gen 2 Tuning
Topic: Timing Tables
Replies: 8
Views: 17237

Re: Timing Tables

My concern is with the cl/ol transistion tables. I have no idea which table does what. It says the table is used with OL transitions but no timing is changed there. Only in the Normal and Overload Timing tables. Arent the CL/OL tables suppose to be more involved with going WOT? Im sorry for sounding...