Search found 10 matches

by Maxl
January 26th, 2023, 7:21 am
Forum: MAZDASPEED6/Mazda 6 MPS Tuning
Topic: EGR P0401 insufficient flow after flashing Base US93/EU98 map
Replies: 13
Views: 4890

Re: EGR P0401 insufficient flow after flashing Base US93/EU98 map

Hey,

Okay I will do this. But I have to wait until it's a little bit warmer outside. At Winter temperatures the Coldstart RPM are in general lower.

Greets
by Maxl
January 23rd, 2023, 4:29 am
Forum: MAZDASPEED6/Mazda 6 MPS Tuning
Topic: EGR P0401 insufficient flow after flashing Base US93/EU98 map
Replies: 13
Views: 4890

Re: EGR P0401 insufficient flow after flashing Base US93/EU98 map

Hi,
I don't know why but it is like it is. When I remove versatune than it's like I wrote above. It's not a problem but I would like to know why it's like that :-D
by Maxl
January 22nd, 2023, 11:55 pm
Forum: MAZDASPEED6/Mazda 6 MPS Tuning
Topic: EGR P0401 insufficient flow after flashing Base US93/EU98 map
Replies: 13
Views: 4890

Re: EGR P0401 insufficient flow after flashing Base US93/EU98 map

It's not a big difference but I try to describe: My OEM: The engine revs exact to 2000u/min and stay there for a couple of seconds and than slowly go down With Versatune: The engine revs a little bit over 2000 (~2100) stay there for some seconds (but I think a little bit less than OEM) and than slow...
by Maxl
January 22nd, 2023, 8:54 am
Forum: MAZDASPEED6/Mazda 6 MPS Tuning
Topic: EGR P0401 insufficient flow after flashing Base US93/EU98 map
Replies: 13
Views: 4890

Re: EGR P0401 insufficient flow after flashing Base US93/EU98 map

Hi,

After Removing Versatune and later Installing it again the error didn't appear again .. :?:

And I don't know why the Coldstart is different with Versatune / US Software compared to my OEM Software, maybe its something about emission... :)

Greets
by Maxl
May 29th, 2022, 5:39 am
Forum: MAZDASPEED6/Mazda 6 MPS Tuning
Topic: EGR P0401 insufficient flow after flashing Base US93/EU98 map
Replies: 13
Views: 4890

Re: EGR P0401 insufficient flow after flashing Base US93/EU98 map

Hello, I had the same error after installing versatune. I also thought it was coincidence. Then later I installed a egr block off plate and disabled the error. Now because of other reason I removed Versatune from my car but I let the block off plate installed and I don't get any errors. I don't know...
by Maxl
January 28th, 2022, 9:59 pm
Forum: Feature Requests
Topic: Cold Start RPM Mazdaspeed 3/6
Replies: 1
Views: 2083

Cold Start RPM Mazdaspeed 3/6

Hey, Is there a possibility to add a setting that we can change the Cold Start rpm's ? I think many people would like to set them lower. Sometimes it's really annoying when the car starts at 2000 rpm early in the morning with a loud exhaust :D I know the way with the gas pedal, but I think it would ...
by Maxl
August 2nd, 2021, 10:25 am
Forum: MAZDASPEED6/Mazda 6 MPS Tuning
Topic: OEM Mazdaspeed 6 with Base 93US/98EU Tune
Replies: 9
Views: 7033

Re: OEM Mazdaspeed 6 with Base 93US/98EU Tune

Hi, A little bit time is gone and the last days I had a bit time to look in the tune.. so now I have some questions :) 1. Why the BCS table has less values in the area from 3000rpm to ~4500 rpm than OEM even though the loads are set higher? 2. As we can see my car isn't able to flow much more air in...
by Maxl
March 28th, 2021, 8:40 am
Forum: MAZDASPEED6/Mazda 6 MPS Tuning
Topic: OEM Mazdaspeed 6 with Base 93US/98EU Tune
Replies: 9
Views: 7033

Re: OEM Mazdaspeed 6 with Base 93US/98EU Tune

Hi, It's a bit time gone but now the weather is better for logs :) I also installed a Corksport TMIC. I see in the log that the new TMIC help in airflow but I also have in top end a little higher bat than with the OEM TMIC. I think the less pressure lose from the new TMIC is better than the BAT's, r...
by Maxl
January 19th, 2021, 9:34 am
Forum: MAZDASPEED6/Mazda 6 MPS Tuning
Topic: OEM Mazdaspeed 6 with Base 93US/98EU Tune
Replies: 9
Views: 7033

Re: OEM Mazdaspeed 6 with Base 93US/98EU Tune

Hi, Thanks for your answers. Turbo / Car has ~ 110.000 km on. Next time you log please use this logging preset:6MPS-OL-Logging-2.vtpre Next time logging, I will use this preset. You say at this temperature I should have really 250 to 265 g/s? Since I posted here first time I changed from the Simota ...
by Maxl
January 8th, 2021, 1:36 pm
Forum: MAZDASPEED6/Mazda 6 MPS Tuning
Topic: OEM Mazdaspeed 6 with Base 93US/98EU Tune
Replies: 9
Views: 7033

OEM Mazdaspeed 6 with Base 93US/98EU Tune

Hi @ all I'm new to Versatune and have an almost OEM Mazda 6 MPS (Catback, Simota Filter and Air Box little modded). I wanted to test how it feel to have a little more power so I installed the Versatuner Base 93US/98EU Octane map and did a logfile. For me it doesn't look so bad, the car drives very ...