Do you mind sharing a screenshot of how the cells look on your MAF curve? :wave I know you were asking @jlvaldez for a response but it doesn't look like they have been active since July 2022 ... So FWIW here is a screen shot of mine, incase they don't respond. image_2024-01-16_073039482.png image_2...

0124alexrx8 wrote: ↑November 22nd, 2023, 1:55 am Wow man, appreciate it. Thank you.

You should see a change in the Actual AFR beyond 15.1 - 15.4 especially once you go into open loop.

Walle has posted a good write up / discussion you can see in this thread
viewtopic.php?f=25&t=4316

Edit: Check this Post out from Walle: https://www.versatune.net/forum/viewtopic.php?p=16638#p16638 I don't have any experience with tuning a Bridgeport however: 1) If you can post an idle log. More info is always better if someone see's this that can help. 2) Full Bridgeport is a significant change....

I think you accidentally posted the screen clip of decel table twice instead of your dwell table.

Your variable fresh air duct is set to 5600? Hasn't that been removed with the AEM intake installation?

Thanks for keeping us posted

Wow, this is terrific!

If it wasn't pissing down rain and only 7c outside I would take this for a spin.

I will update a tune with your suggestions and report back when I can get an opportunity.

Thanks for the reply. If it helps at all, you only need to worry about it in Open Loop. If I recall it takes quite a bit before it even changes by 1 afr. Don't quote me but I want to say something like 13% before you will see a change for example from 11.0 afr to 12.0 But I hear it would be a nice f...

Why?

Are you trying running a boosted setup?

What is there to gain otherwise?

All that aside are the hoses and gaskets E85 compliant in the RX8?

Sorry if this is a stupid question. But why would you want this? What is the use case? The way I see it, especially on the renesis if the ECU wants to add fuel let it add fuel. I wouldn't want to artificially handicap the ECU from adding more fuel trims. I guess tho ... I could see the use in preven...