Thanks a lot :bow the hose from the wastegate to the BCS was kink under the inlet hose. First i reduced the BCS DC Base, i bring it 2% over the OTS 91 Tune to follow my target load. I also pulled back the target load instead of 2.35 at 4000rpm i put it at 2.2. For the WOT afr passed 5000rpm i put ba...

Nop its only the k04 2 years old and for the tune in BCS Table im just a little bit under the value from the OTS Stage 2 CPE CAI maybe if a send you the map it will be better

im running the oem BCS but maybe the line from the BCS to the turbo inlet pipe is loose and i was not on a clean flat road maybe some bump diturb the log... But i will do another run somewhere else, do you think a should lower the load table in the low rpm to prevent rod bending?

This is what i log last time if i missed some setting on the log tell me and i will do another log

@mituc, Hi i did some twick with the 91 Crackle pop tune i used some of the table from 93 stage 2, did one pull everything seems to be fine but im not sure

Hi, im kinda new on tuning, i used some tables from the 93 Stage 2 Corksport Map on the 91 octane Crackle pop tune i add some twick but im not sure if its safe and i would like to know how i can get it better with some help thanks to everyone!