Search found 20 matches

by N3RDPWR
June 4th, 2013, 3:01 am
Forum: Announcements
Topic: VersaTuner 1.8.5 Released
Replies: 14
Views: 55571

Re: VersaTuner 1.8.5 Released

I have an issue with 1.8.5 and logging.

If I was to do logging for a short time there is no issue.
However if I was to log for a long period of time it would crash and close the problem. Memory leak maybe?

I've had to revert back to 1.7 in the mean time.
by N3RDPWR
June 2nd, 2013, 6:08 am
Forum: Mazda 2.3 DISI Turbo
Topic: More Idle issues
Replies: 4
Views: 8407

Re: More Idle issues

Sorry for the delay. I decided to go back to 1.7 as the 1.85 version kept crashing while logging. I flashed the 1.7 stock tune. (ie. create new, save, flash) The only modification was increase the idle to 800rpm... I've attached some more logs.... no MAF cal done... Advise would be great. It stalls ...
by N3RDPWR
May 27th, 2013, 7:20 pm
Forum: Mazda 2.3 DISI Turbo
Topic: More Idle issues
Replies: 4
Views: 8407

Re: More Idle issues

The ecu still re-learning even after 450km?

I'm sure there is a better way to get the car to idle better once coming off throttle.

If I was to hand my car to someone to tune I would expect all aspects of the tune were good... There must be a secret to it?
by N3RDPWR
May 27th, 2013, 7:45 am
Forum: Mazda 2.3 DISI Turbo
Topic: More Idle issues
Replies: 4
Views: 8407

More Idle issues

So I've removed my FMIC and replaced the stock TMIC, Flashed the ECU with a 1.7 version of Versa tune base flash and the car was fine. It seems to have made a big difference as there was some leaks on the plumbing from wear and tear... However I decided to disable to a CEL as it was somewhat annoyin...
by N3RDPWR
April 28th, 2012, 6:54 am
Forum: Mazda 2.3 DISI Turbo
Topic: Idling issues after driving and flash of ecu
Replies: 22
Views: 36446

Re: Idling issues after driving and flash of ecu

Ok... so new development in the story... I've pulled out the FMIC.. well the plumbing for it... I can't be bothered taking off the front bar just yet :) I've put the the top mount back in... Now... There is a fair bit of oil in the plumbing.... which looks like I need a catch can... so thats the nex...
by N3RDPWR
April 19th, 2012, 4:40 am
Forum: Mazda 2.3 DISI Turbo
Topic: Idling issues after driving and flash of ecu
Replies: 22
Views: 36446

Re: Idling issues after driving and flash of ecu

I understand that the LTFT is positive however the STFT is constantly sitting in the negitive to counter the positive value... what the.... After running the mix with 5% more it still runs rich as. And when I back off the lambda goes to 0.6xx... I will log this and post on the forum. This is certain...
by N3RDPWR
April 18th, 2012, 10:16 am
Forum: Mazda 2.3 DISI Turbo
Topic: Idling issues after driving and flash of ecu
Replies: 22
Views: 36446

Re: Idling issues after driving and flash of ecu

Ok, So I've did +10% on those values... it runs even worse.. So I removed and did +5%... doesn't run so good... In to the process of shitting myself due to the Tactrix adapter being a piece of shit and timing out during 3 attempts at flashing and recovering.... The oil... most likely a left over mes...
by N3RDPWR
April 15th, 2012, 7:07 am
Forum: Mazda 2.3 DISI Turbo
Topic: Idling issues after driving and flash of ecu
Replies: 22
Views: 36446

Re: Idling issues after driving and flash of ecu

In the mean time I'll keep playing with the tune :)
by N3RDPWR
April 15th, 2012, 5:38 am
Forum: Mazda 2.3 DISI Turbo
Topic: Idling issues after driving and flash of ecu
Replies: 22
Views: 36446

Re: Idling issues after driving and flash of ecu

I can email the logs and pictures?