These are the current settings I am using:
It goes from 2k up.


I found that when you let off the gas, you have to very slightly apply a little pressure to the gas pedal to get the pops and crackles to work sometimes.

Does anyone know how the Decel Fuel Cut Requested Load Threshold and Decel Fuel Cut Requested Load Threshold Additive tables work? Is it that when the load for a specific RPM increases past the Load Threshold it disables the fuel cut and fuel is pumped in? Or is it when the load for that RPM drops b...

After logging, noticed that I wasn't dropping below the default 0.1875 load value to trigger the retarded ignition timing on decel. I related this to having raised the IDLE RPM - In Gear to 700 and IDLE RPM - AC ON - In Gear to 800 . But could be other reasons. Also switched the BOV to 50-50 because...

Was using this tune as a base: Base 93US_98EU Octane High Load with High Flow Down Pipe and Crackle and Pop. Lots of pops and crackles with the stock airbox and catless down pipe with headers. Added a 3" MAF full intake and dual-port blow off valve. Have it set to 75% recirc and 25% vent to atm...