Thanks Ugnius...finally found the files after using the ''show hidden files'' option

Hi,

My tuning laptop died yesterday, and I didnt save the last couples tunes on a USB key

I removed the hard drive from the dead laptop and tried to find the tunes using a SATA/USB adapter (the hard drive is OK), but I cant find them

Where are the Versatune files saved on the hard drive?

Thanks

A bit late to the party, but I run Versatuner on my AspireOne with Windows Starter...no problem at all

Follow_me8, what are you using to tune the TCM...ive been looking at this for some time and found nothing (except maybe for TCM-2000 : https://www.powertraincontrolsolutions. ... Controller )

Thanks

Thanks for the answer Mituc...I was actually refering to you when I said :''top gun''

Do you think the Overlaod retard is added on top of the Ignition Overlaod table?

Do you mind if I contact you directly for my tuning questions (I would pm you on MSF)?

I have some questions in respect to the Overload tables on the gen 2 CX-7... I was playing with ignition timing in the Normal table, and noticed that none of the changes I made were effective when logging Decided to also change the ignition timing Overload table, and then the changes were effective ...

Alpha Wolf, You wont regret your purchase of Versatuner...this software is essential to tap the potential of the engine, and take advantage of the mods you will put on Even stock, you can really wake up the car with something like Sassimac's tune (he gained 21HP and 44lbs/ft at the wheel) I could no...

I guess the best option should be to tune with the "requested load X gear", so the APP% wont matter

Here is a log that show the APP at idle and WOT (all my log show the same patern)

On my gen2 CX-7, the logs shows that the minimum APP at idle is 31%, and the maximum APP at WOT is 76%!?!?

Does this mean that the lower and upper parts of my "APP requested load" table are worthless?

Yep for sure...going to to some datalogging tonight Does anyone know with the CX7 if the Speed6 Downpipe is a direct fit or is there some tweaking that needs to be done. The Speed6 M2 downpipe is not a direct fit...its a long downpipe that replace the 2 cat On the CX-7, the second cat is welded on ...