Thanks for the feedback, today I fitted a K&N filter to the corksport tip (I bought the corksport used and the filter was in poor condition) the car is more powerful but the MAF Cal is about out (lean I am amazed that the filter makes such a difference). I am going to drive steadily over the wee...

Thanks for your help. Wanted to check that everything looked reasonable before I do more investigation.


John

I am afraid I have not got a log from before the intake was fitted, that's part of the problem, in the previous post zip file is a new log with all the parameters you mentioned, starts at 2000rpm in 3rd to redline then a brief run 4th.

John

Hi Mituc, Thanks for replying. The tune is the Base High load tune un-modified (attached) I am an electronics engineer by trade and spent more than 10 years repairing the hardware side of ECU's I played around with tuning in the early days of ECU when they were very much simpler but am out of touch ...

Hi been running Versatuner for about 8 months on 2008 3 MPS, very happy with the results car was standard apart from modified air box (all bottom cut out and K&N panel filter) was running Base 93US/98EU octane and very happy with it. This year I decided to modify a little, I added 3" Cat ba...

Dumb newbie question which has probably already been answered but I can't obviously see it, do I need to do the MAF calibration with a stock intake, just bought versatune today and installed the high load map.

Thanks,
John