On my eclipse I had a tune solution called ECMlink. It give me the ability to see high knock when I was not logging. At least it indicated that I had exceeded a certain level of knock by flashing one of my dash light(e.g. coolant lamp). It would flash if I was exceeding 3 counts of knock or 5 counts...

Okay so I'm ready to try my hand a load tuning but unsure where to start exactly. Which tables should I start with? I running the a BNR stage 3, downpipe, upgraded top mount, and 3 bar map. Also have the hpfp internal which I will be installing. I'm just not clear on which of the load tables I shoul...

Yes, I'm using the 0 281 002 845 sensor. I drove it with the 296 setting and it seems to have fixed my problem. I initially did not know I could use the 296 but found a posting about using unsafe values. So my problem was the settings. Now that I have this out of the way I can continue to try and wo...

Yes, I'm using the 0 281 002 845 sensor. I drove it with the 296 setting and it seems to have fixed my problem. I initially did not know I could use the 296 but found a posting about using unsafe values. So my problem was the settings. Now that I have this out of the way I can continue to try and wo...

Here is the tune

I just made a change to the scalar A and changed it to 296. Haven't driven it yet but will later today

Okay I recheck my numbers and they appear to be right. I purchased a new sensor and I'm still getting the same code. I missing something here but don't know what it is. Can some attached a screen print of what they are using? Maybe it is the harness that is causing the problem but I want to eliminat...

I will check again. But I almost certain I did it correctly.

connections are fine. I don't get the error with my stock sensor. maybe the pNP pigtail is bad or the sensor. not sure which at this point. anyone have the wiring diagram for the PNP harness?

I will recheck the connections. Just wanted to make sure I wasn't missing a step

Hey I'm having the same issue, getting p0069 when using the 3 bar map sensor. Am I not doing something correctly?

thanks