Search found 23 matches

by JohnnyT
November 14th, 2019, 9:19 am
Forum: Feature Requests
Topic: More exact vehicle speed logging
Replies: 6
Views: 7567

Re: More exact vehicle speed logging

Image

He is asking because he has been helping me with the tune and I keep seeing this in all my logs.
by JohnnyT
September 15th, 2019, 7:05 am
Forum: MAZDASPEED3/Mazda 3 MPS Tuning
Topic: Not hitting load targets
Replies: 28
Views: 28933

Re: Not hitting load targets

I'm getting mine figured out. Still working on mafcal but I think it was just me not setting the table correctly. I'll let you know when I get past the mafcal. Mines an 07 speed3 and I'm running a Precision Turbo 5862 journal bearing. Just a little bigger then the ko4 lol.
by JohnnyT
September 4th, 2019, 10:51 am
Forum: MAZDASPEED3/Mazda 3 MPS Tuning
Topic: Not hitting load targets
Replies: 28
Views: 28933

Re: Not hitting load targets

I know 12+ is not great as I am in the process of dialing it in but I have already added a decent amount of fuel and I am just doing a 93 pump tune right now. I know the BCS DC is set to 0 as that is where I wanted it to see spring pressure BUT correction is set to 20 so shouldn't it be adjusting +2...
by JohnnyT
September 3rd, 2019, 8:28 am
Forum: MAZDASPEED3/Mazda 3 MPS Tuning
Topic: Not hitting load targets
Replies: 28
Views: 28933

Re: Not hitting load targets

I did just adjust the maf values and they have only cleaned up a little. I am targeting 11.75 and I feel like my mafcal is pretty rich already so maybe I have been having the same issue and not noticed. This was only my 3rd revision but I felt like I should be closer to target. On revision one I add...
by JohnnyT
September 3rd, 2019, 7:55 am
Forum: MAZDASPEED3/Mazda 3 MPS Tuning
Topic: Not hitting load targets
Replies: 28
Views: 28933

Re: Not hitting load targets

I seem to be having a similar issue. I just got my car rebuilt and am working on mafcal/basetune. 2007 Speed3 Sport. I am requestion 2.2 load across the board and can't seem to hit it. https://snipboard.io/g4AMrx.jpg I checked and all my tables are correct "set higher so it defaults to load by ...
by JohnnyT
November 27th, 2018, 11:19 am
Forum: Announcements
Topic: VersaTuner 1.13 released
Replies: 8
Views: 90481

Re: VersaTuner 1.13 released

ScanTool OBDLink SX USB: Professional Grade OBD-II Automotive Scan Tool for Windows - DIY Car and Truck Data and Diagnostics by ScanTool Learn more: https://www.amazon.com/dp/B005ZWM0R4/ref=cm_sw_em_r_mt_dp_U__s7B.BbSZ32NV7 Would this also work for flashing now? Any updates on logging speed and wifi?
by JohnnyT
July 11th, 2018, 4:04 am
Forum: Announcements
Topic: VersaTuner 1.13 released
Replies: 8
Views: 90481

Re: VersaTuner 1.13 released

Ugnius @ VersaTune wrote:Only Bluetooth at this time. We will see if we can add Wifi easily.
That would be great, I know that wifi offers a lot more bandwidth for logging etc.
by JohnnyT
July 10th, 2018, 10:19 am
Forum: Announcements
Topic: VersaTuner 1.13 released
Replies: 8
Views: 90481

Re: VersaTuner 1.13 released

Thanks for the update. :D Is the wireless flashing bluetooth only does it support the wifi obd devices?

ScanTool OBDLink MX Wi-Fi: OBD Adapter/Diagnostic Scanner for iOS, Android & Windows
by ScanTool
Link: http://a.co/3CzC4GM
by JohnnyT
March 28th, 2018, 2:57 am
Forum: MAZDASPEED3/Mazda 3 MPS Tuning
Topic: Winter Boost Creep - CS Turbo
Replies: 19
Views: 35234

Re: Winter Boost Creep - CS Turbo

After various testing and trying everything I could think of it was still creeping. CS ran out of ideas and told me I should get a CAT which might help. As of now I am not going to worry about it and might just run external wastegate off OEM manifold as I have one laying around.
by JohnnyT
February 5th, 2018, 3:55 pm
Forum: MAZDASPEED3/Mazda 3 MPS Tuning
Topic: Winter Boost Creep - CS Turbo
Replies: 19
Views: 35234

Re: Winter Boost Creep - CS Turbo

More updates, I held the wastegate flapper open with a wire and I still built boost, 24 lbs! I think that either it is not opening enough or something else is wrong. I might try and get a small camera to run in the second O2 sensor hole and see if the flapper hits anything. Here is the log, I made s...