Search found 507 matches
- August 27th, 2023, 11:01 pm
- Forum: Software Support
- Topic: Locked ECU?
- Replies: 2
- Views: 1089
Re: Locked ECU?
Yes, you can flash this ECU with VersaTuner.
- August 9th, 2023, 8:02 pm
- Forum: Hardware Support
- Topic: OBD interface problem
- Replies: 4
- Views: 43020
Re: OBD interface problem
It did not work for us at all when we bought one for testing. It did work for some of our customers.
- August 9th, 2023, 4:03 am
- Forum: Hardware Support
- Topic: OBD interface problem
- Replies: 4
- Views: 43020
Re: OBD interface problem
ELM327 and KKL cannot be used to reflash a vehicle with VersaTuner. You need to get a compatible vehicle interface.
Available options are:
- OBDLink SX (most popular), EX, LX or MX
- any vehicle interface that implements the J2534 PassThru standard (Tactrix OpenPort 2.0, Mongoose Pro, VCM, etc.)
Available options are:
- OBDLink SX (most popular), EX, LX or MX
- any vehicle interface that implements the J2534 PassThru standard (Tactrix OpenPort 2.0, Mongoose Pro, VCM, etc.)
- July 25th, 2023, 6:45 am
- Forum: Software Support
- Topic: Getting error when attempting to install versa tune on ECU
- Replies: 1
- Views: 3112
Re: Getting error when attempting to install versa tune on ECU
Responded via email. Please use email for urgent issues.
- July 21st, 2023, 6:04 am
- Forum: Series I Tuning
- Topic: Stock tune for 2004 6 speed RX-8
- Replies: 1
- Views: 1101
Re: Stock tune for 2004 6 speed RX-8
VersaTuner does not delete the source files if you delete the tunes from "My Tunes" and vice versa.
To get the stock tune, just click "New Tune" and the stock tune will load in the Tune Editor.
To get the stock tune, just click "New Tune" and the stock tune will load in the Tune Editor.
- July 20th, 2023, 7:08 pm
- Forum: Mazda 2.3 DISI Turbo
- Topic: Help request
- Replies: 1
- Views: 970
Re: Help request
You need to calibrate your MAF. Due to the much larger MAF housing, the ECU is getting incorrect information about the amount of air flowing in.
You will also need to tune for the larger turbo. There is no way you can run these mods without a proper tune.
You will also need to tune for the larger turbo. There is no way you can run these mods without a proper tune.
- July 20th, 2023, 7:05 pm
- Forum: Software Support
- Topic: ECU not supported Message
- Replies: 1
- Views: 990
Re: ECU not supported Message
You did everything correctly by providing the necessary data to the calibration team. Support for your calibration will be added in 1-2 business days. There are a lot of different ECU types and versions for each Mazda model and while we support most of them out the box, some are new or not seen to u...
- July 20th, 2023, 7:02 pm
- Forum: Software Support
- Topic: Another incorrect VIN
- Replies: 2
- Views: 4056
Re: Another incorrect VIN
Letters O and I are not allowed in VINs, it's always zero and one. VersaTuner website will check the VIN when you type it.
But if you make a mistake, just contact our support and we will correct the VIN for you.
But if you make a mistake, just contact our support and we will correct the VIN for you.
- July 14th, 2023, 6:26 pm
- Forum: Software Support
- Topic: Versatune install error
- Replies: 5
- Views: 1529
Re: Versatune install error
There's not much we can do. Those devices constantly query the ECU and interfere with the flash process. They will interfere with any tuning solution you decide to use. You don't need to completely remove them. Just disconnect them from power or from the CAN bus for 1 hour while you reflash the ECU.
- July 14th, 2023, 8:14 am
- Forum: Software Support
- Topic: Versatune install error
- Replies: 5
- Views: 1529
Re: Versatune install error
Then you probably have some other device connected to the CAN bus or the OBD-II port of the vehicle. Gauges, loggers, alarms, modules that keep the lights or radio on. Common culprits are devices made by MX-5 Things.
You will need to disconnect them temporarily while you are reflashing the ECU.
You will need to disconnect them temporarily while you are reflashing the ECU.