Search found 31 matches

by OMISPEED3
September 9th, 2012, 2:48 pm
Forum: MAZDASPEED3/Mazda 3 MPS Tuning
Topic: EGT Temps
Replies: 4
Views: 11462

Re: EGT Temps

Some say that if the EGT's go past 1500F the shaft of the stock turbo will soften and may bend. However, the shaft needs to reach the 1500F itself, so it will take a while for that 1700F exhaust gasses to heat it up. Some people measure the EGT in one cylinder and some people said is you go beyond ...
by OMISPEED3
September 9th, 2012, 1:58 pm
Forum: MAZDASPEED3/Mazda 3 MPS Tuning
Topic: EGT Temps
Replies: 4
Views: 11462

EGT Temps

Hey Guys! I got doubts about the EGT. Today I make WOT Log and I notice that my EGT Temps runs about 1,700°F at WOT to redline. I'm reading all cylinders in the collector before the turbo. To be honest I really don't know if is safe or not. Attached is a log and a couples pics of my setup. My A/F ra...
by OMISPEED3
September 2nd, 2012, 12:21 pm
Forum: MAZDASPEED3/Mazda 3 MPS Tuning
Topic: DTC P2178, P2188
Replies: 11
Views: 34912

Re: DTC P2178, P2188

Well, the injector seals were broken, I replaced them with the SURE seals. So let see how the car works.
by OMISPEED3
August 29th, 2012, 12:57 pm
Forum: MAZDASPEED3/Mazda 3 MPS Tuning
Topic: DTC P2178, P2188
Replies: 11
Views: 34912

Re: DTC P2178, P2188

Ok, my LTFT are -25%. The MAF housing is 3". The car was running good with only -0.8% on LTFT. Now with those DTC on the car idle is crazy and running very rich. You can smell the fuel out of the exhaust. I will later post logs.

Regards!

Sent from my Classic EVO!
by OMISPEED3
August 29th, 2012, 9:51 am
Forum: MAZDASPEED3/Mazda 3 MPS Tuning
Topic: DTC P2178, P2188
Replies: 11
Views: 34912

DTC P2178, P2188

Hello guys! My ecu is throwing these codes: P2178 & P2188. I checked every vacuum line, BOV seals, spark plugs and everything is ok. I only need to check my Injectors seals. I logged and the STFT & LTFT are -25% and sometimes 15%. The MAF and the Oxygen sensor are responding good. I have no ...
by OMISPEED3
August 28th, 2012, 4:04 pm
Forum: Mazda 2.3 DISI Turbo
Topic: MAF Calibration 101
Replies: 67
Views: 319043

Re: MAF Calibration 101

It should be the same... I guess!

Sent from my Classic EVO!
by OMISPEED3
July 23rd, 2012, 11:36 pm
Forum: Software Support
Topic: Randomly Install
Replies: 2
Views: 6275

Re: Randomly Install

Ok, I think I found what is going on, you can't delete a dashboard preset because it create an error and it would ask for install the program again.
by OMISPEED3
July 22nd, 2012, 10:21 am
Forum: MAZDASPEED3/Mazda 3 MPS Tuning
Topic: What changes in the tune when going big turbo?
Replies: 25
Views: 38697

Re: What changes in the tune when going big turbo?

Hello guys!

I got questions about how the BCS DC works, Why my WCS DC go up to 20% when my BCS DC is clear out all to zeros??? It not supposed to open the WG?? I checked my EWG diaphragm and it looks good. It always open at 12.5 psi of boost. I'm using a 3 port grimmspeed EBCS.

I just feel lost!
by OMISPEED3
July 19th, 2012, 10:50 pm
Forum: Software Support
Topic: Randomly Install
Replies: 2
Views: 6275

Randomly Install

Hello Guys! Ultimately I have randomly install VT again. It ask for package.msi When I install it again, everything like: Logs, presets and tunes still in the same place. I have no idea what is going on with my PC or the software. Has anyone had this problem before? Additional info OS: Windows 7 32 ...
by OMISPEED3
July 18th, 2012, 4:12 pm
Forum: MAZDASPEED3/Mazda 3 MPS Tuning
Topic: Knock at Part Throttle
Replies: 5
Views: 10637

Re: Knock at Part Throttle

Another thing is, I didn't hear a thing when KR was happening.

Sent from my Classic EVO!