Search found 42 matches
- August 3rd, 2019, 9:45 am
- Forum: Hardware Support
- Topic: Interface Not Connected
- Replies: 2
- Views: 10820
Interface Not Connected
Running up-to-date Windows 10 via Boot Camp on a MacBook Pro. Using VersaLink MongoosePro ISO/CAN2. When attempting to connect to vehicle, no software will recognize that the device is plugged in. The green indicator light on the OBD2 end is flashing fast like normal. In the MongoosePro Configurator...
- April 24th, 2019, 9:23 am
- Forum: CX-7 Tuning
- Topic: Tune Turbo Upgrade
- Replies: 41
- Views: 60154
Re: Tune Turbo Upgrade
I could not find any WOT log among the ones you've sent. However, with a hollowed cat you should check the "Installed catless downpipe" option when flashing the tune. Reply sent in PM. Checking logs again. I forgot to mention that option is checked when tune flashed. What exactly does it ...
- April 16th, 2019, 10:52 am
- Forum: CX-7 Tuning
- Topic: Tune Turbo Upgrade
- Replies: 41
- Views: 60154
Re: Tune Turbo Upgrade
Ambient temps around 75deg, 28% humidity today. Barometric pressure here today 14.818psi. Running 93 octane gasoline (w/ up to 10% ethanol). All regular maintenance is pretty much up-to-date except maybe EGR & intake valve cleaning. Engine and turbo have less than 50k miles on them. 201k miles o...
- April 14th, 2019, 12:29 pm
- Forum: CX-7 Tuning
- Topic: Tune Turbo Upgrade
- Replies: 41
- Views: 60154
Re: Tune Turbo Upgrade
Primary catalyst hollowed out. P0421 still comes back after monitors are fully reset after about 150 miles. Disabled DTC. Slightly louder and deeper sound but nothing significant. It was pretty clogged. Somewhat noticeable improvement in engine response and turbo spool. LTFT's have a larger swing (a...
- December 3rd, 2018, 3:35 am
- Forum: CX-7 Tuning
- Topic: Tune Turbo Upgrade
- Replies: 41
- Views: 60154
Re: Tune Turbo Upgrade
Yeah exhaust is stock. I recently got a DTC P0421 warmup catalyst efficiency, though.mituc wrote:The CS turbo you have is really struggling for 200g/s of air... Are you on factory exhaust?
Sent from my iPhone using Tapatalk
- December 3rd, 2018, 2:12 am
- Forum: CX-7 Tuning
- Topic: Tune Turbo Upgrade
- Replies: 41
- Views: 60154
Re: Tune Turbo Upgrade
https://www.dropbox.com/s/975gm6azeyv5f7e/Boost%20control%20-%202018-12-02%2016.16.16.csv?dl=0 https://www.dropbox.com/s/te8g1u9lxyf4aao/Tune-3_5BAR-diag%20-%202018-12-02%2016.05.43.csv?dl=0 https://www.dropbox.com/s/far1qlnns5z2j33/Tune-3_5BAR-diag%20-%202018-12-02%2016.07.53.csv?dl=0 https://www.d...
- December 2nd, 2018, 10:37 am
- Forum: CX-7 Tuning
- Topic: Tune Turbo Upgrade
- Replies: 41
- Views: 60154
Re: Tune Turbo Upgrade
Got a chance to pull some logs today. In ascending order of time stamp: idle, normal drive, WOT from stop, WOT from cruise, WOT w/ boost PID preset. Barometric pressure today is about 14.6psi. Temperature is 68F and 95% humidity. Logs: https://www.dropbox.com/s/q1y2tfynlunbk7y/VersaTuner%20Logs%2012...
- November 24th, 2018, 3:47 am
- Forum: CX-7 Tuning
- Topic: Tune Turbo Upgrade
- Replies: 41
- Views: 60154
Re: Tune Turbo Upgrade
Significant improvement with the MAF calibration. It's not perfect, but certainly better. I've only driven about 25 miles so far with it but LTFTs are mostly within +/- 3%. A couple of spikes up to +/- 7-8% occasionally but I'll wait to see if they settle. Partitions are set at 5.7, 18, 30, 50, 80, ...
- November 23rd, 2018, 5:28 am
- Forum: CX-7 Tuning
- Topic: Tune Turbo Upgrade
- Replies: 41
- Views: 60154
Re: Tune Turbo Upgrade
When you swap the struts (OEM springs are ok IMHO) a tower strut brace will be a good addition. Check this out: http://www.mazdaspeedforums.org/forum/f123/first-romanian-bt-cx-7-a-219098/ I have both the tower strut brace and a lower/underside brace and the handling is better than a stock 2014+ maz...
- November 22nd, 2018, 12:07 pm
- Forum: CX-7 Tuning
- Topic: Tune Turbo Upgrade
- Replies: 41
- Views: 60154
Re: Tune Turbo Upgrade
This is the MAF cal I extracted from skiptowncat's tune. They say it doesn't require a calibration because the deviation from OEM is within the accepted limits. https://www.dropbox.com/s/kwo6mli3pr4s760/CS-SRI-MAF-cal.xlsx?dl=0 Awesome, thank you. I'll flash this and report back. Now to get it runn...