Search found 65 matches
- January 22nd, 2013, 3:39 am
- Forum: Mazda 2.3 DISI Turbo
- Topic: Idle AFR
- Replies: 3
- Views: 7278
Re: Idle AFR
Maybe Steve knows more.
- January 21st, 2013, 3:31 pm
- Forum: Mazda 2.3 DISI Turbo
- Topic: Idle AFR
- Replies: 3
- Views: 7278
Idle AFR
Which table is registered for the mixture at idle?
I made a poor mix on the entire CL AFR table, but at idle it still remained 14.7:1.
I made a poor mix on the entire CL AFR table, but at idle it still remained 14.7:1.
- January 8th, 2013, 5:29 pm
- Forum: MAZDASPEED3/Mazda 3 MPS Tuning
- Topic: Knock retard timers
- Replies: 4
- Views: 12303
Re: Knock retard timers
I set 320.
Retards are reduced faster than in stock.
Retards are reduced faster than in stock.
- November 19th, 2012, 11:49 am
- Forum: Mazda 2.3 DISI Turbo
- Topic: Boost versus timing
- Replies: 3
- Views: 7087
Re: Boost versus timing
Increase the absolute pressure equal increase the power, all other things being equal. For example, boost 1 bar (2 bar absolute pressure) match 300 HP, then for boost 1.5 bar (2.5bar AP) you'll get 300*2.5/2.0=375 HP (If the timing, BAT and AFR will remain constant. About timing, I know that 1 degre...
- November 19th, 2012, 8:11 am
- Forum: Mazda 2.3 DISI Turbo
- Topic: Boost versus timing
- Replies: 3
- Views: 7087
Re: Boost versus timing
Use VirtualDyno and logs of different tunes (max boost, max ign, poor mix, ...)
- November 12th, 2012, 5:28 am
- Forum: Feature Requests
- Topic: Injector Phasing Multiplier table
- Replies: 2
- Views: 8296
Injector Phasing Multiplier table
Can you add this table to the next release? Injector Phasing Multiplier : This table name was changed from Injector Latency Multiplier in the Beta release. Decreasing this value will move the injector opening point to earlier in the engine cycle, increasing fuel delivery (this will cause Injector Du...
- November 2nd, 2012, 4:01 am
- Forum: MAZDASPEED3/Mazda 3 MPS Tuning
- Topic: 100% CL - benefits and drawbacks
- Replies: 12
- Views: 28603
Re: 100% CL - benefits and drawbacks
I had a rich mixture (<0.75) when starting feed meth in OL.
With FTCL my Actual AFR always equal Desired AFR.
But I can not increase CL/OL Load Threshold greater than 2.0. So I have OL when load > 2.0.
With FTCL my Actual AFR always equal Desired AFR.
But I can not increase CL/OL Load Threshold greater than 2.0. So I have OL when load > 2.0.
- October 15th, 2012, 11:08 am
- Forum: Discussion in Russian Language / Дискуссия на русском языке
- Topic: Книга жалоб и предложений
- Replies: 15
- Views: 35035
Re: Книга жалоб и предложений
Подитожу так и нерешенные и назревшие проблемы: 1. Знак разделения дробной части отображается в виде запятой даже если в настройках системы выставлена точка, что создает проблемы при копировании таблиц. 2. Нельзя настроить отображение смеси в таблицах в абсолютных величинах. 3. При последовательной ...
- September 20th, 2012, 5:06 am
- Forum: MAZDASPEED6/Mazda 6 MPS Tuning
- Topic: Full Time Closed Loop (FTCL)
- Replies: 1
- Views: 5121
Full Time Closed Loop (FTCL)
I wanted to try a FTCL mode.
But I can not increase CL/OL Load Threshold greater than 2.0.
How to solve this problem if the target load = 2.5?
But I can not increase CL/OL Load Threshold greater than 2.0.
How to solve this problem if the target load = 2.5?
- July 26th, 2012, 4:37 pm
- Forum: Mazda 2.3 DISI Turbo
- Topic: Bosch MAP sensor Plug-n-Play adapter
- Replies: 4
- Views: 8640
Re: Bosch MAP sensor Plug-n-Play adapter
$75? IMHO overpriced.
I bought original Bosch connector for $5
I bought original Bosch connector for $5