It will not. EcuTek locks the ECU on many levels and needs to be removed before any other tuning solution can be installed. Try contacting the company that originally tuned the ECU or a Mazda MX-5 tuning specialist, such as Fab9 Tuning.

jimmy.caille wrote: ↑May 24th, 2023, 10:14 pm Hello, what is the status of this feature request ?

We are not planning to add this feature in the near future due to the wide variety of different vehicle interfaces that can be used with VersaTuner.

The conditions to get crackles and pops on SkyActiv platforms are these: Load < 0.1666 RPM > 2250 APP > 0% In gear you need to decell from fairly high rpm with the accel pedal just off the rest In neutral, you need to rev to like 5k and hold the pedal off of the rest while revs come down Crackles an...

Did you install the drivers?
You can download them from here: https://www.tactrix.com/index.php?optio ... &Itemid=61

Yes, the error is definitely caused by your gauges. Please disconnect them temporarily while you reflash the vehicle or use the dashboard.

Thank you, this is a highly requested feature, we are planning to implement it in one form or another in the future.

What is your ECU calibration ID?

VersaTuner only supports ELM327 based vehicle interfaces over Bluetooth. ELM327 devices have limited functionality and cannot be used to reflash a car, they only provide low speed data logging. We recommend that you get OBDLink SX or Tactrix OpenPort 2.0 which can be used to access all features of V...

vzor wrote: ↑December 25th, 2022, 7:39 am Не появилась ли возможность заглянуть в старую прошивку?
10 лет уже прошло ...

К сожалению, нет.

If you are planning to purchase a paid version of VersaTuner we recommend that you get one of the recommended cables: OBDLink SX or Tactrix OpenPort 2.0
ELM327 adapters are slow, unreliable and cannot be used to reflash the ECU.