Maybe Steve knows more.

Which table is registered for the mixture at idle?
I made a poor mix on the entire CL AFR table, but at idle it still remained 14.7:1.

I set 320.
Retards are reduced faster than in stock.

Increase the absolute pressure equal increase the power, all other things being equal. For example, boost 1 bar (2 bar absolute pressure) match 300 HP, then for boost 1.5 bar (2.5bar AP) you'll get 300*2.5/2.0=375 HP (If the timing, BAT and AFR will remain constant. About timing, I know that 1 degre...

Use VirtualDyno and logs of different tunes (max boost, max ign, poor mix, ...)

Can you add this table to the next release? Injector Phasing Multiplier : This table name was changed from Injector Latency Multiplier in the Beta release. Decreasing this value will move the injector opening point to earlier in the engine cycle, increasing fuel delivery (this will cause Injector Du...

I had a rich mixture (<0.75) when starting feed meth in OL.
With FTCL my Actual AFR always equal Desired AFR.
But I can not increase CL/OL Load Threshold greater than 2.0. So I have OL when load > 2.0.

Подитожу так и нерешенные и назревшие проблемы: 1. Знак разделения дробной части отображается в виде запятой даже если в настройках системы выставлена точка, что создает проблемы при копировании таблиц. 2. Нельзя настроить отображение смеси в таблицах в абсолютных величинах. 3. При последовательной ...

I wanted to try a FTCL mode.
But I can not increase CL/OL Load Threshold greater than 2.0.
How to solve this problem if the target load = 2.5?

$75? IMHO overpriced.
I bought original Bosch connector for $5