Responded via email.

This error can mean one of two things: 1. The ECU is stuck in some weird state after the last reflash. Try disconnecting the battery for a few minutes to reset it and then try again. 2. The ECU was tuned previously with a tuning solution that locks it on a deep level. It has not been tuned with Vers...

You can try.

It will not. EcuTek locks the ECU on many levels and needs to be removed before any other tuning solution can be installed. Try contacting the company that originally tuned the ECU or a Mazda MX-5 tuning specialist, such as Fab9 Tuning.

jimmy.caille wrote: ↑May 24th, 2023, 10:14 pm Hello, what is the status of this feature request ?

We are not planning to add this feature in the near future due to the wide variety of different vehicle interfaces that can be used with VersaTuner.

The conditions to get crackles and pops on SkyActiv platforms are these: Load < 0.1666 RPM > 2250 APP > 0% In gear you need to decell from fairly high rpm with the accel pedal just off the rest In neutral, you need to rev to like 5k and hold the pedal off of the rest while revs come down Crackles an...

Did you install the drivers?
You can download them from here: https://www.tactrix.com/index.php?optio ... &Itemid=61

Yes, the error is definitely caused by your gauges. Please disconnect them temporarily while you reflash the vehicle or use the dashboard.

Thank you, this is a highly requested feature, we are planning to implement it in one form or another in the future.

What is your ECU calibration ID?