VersaTuner 1.12.0 released

Global Forum and VersaTune company related announcements.
Fstrnyou
Posts: 8
Joined: October 18th, 2016, 10:24 pm

Re: VersaTuner 1.12.0 released

Post by Fstrnyou »

mituc wrote:While resetting a few tables back to a previous version I've got this message. If I hit the OK button it would open a new message box. I had to terminate the VT from the task manager...

Image
I too have experienced that error. Working with large tables. Had to click OK about 100 times to get rid of all those windows.

On a side note, I don't see any OTS tunes anymore.
Fstrnyou
Posts: 8
Joined: October 18th, 2016, 10:24 pm

Re: VersaTuner 1.12.0 released

Post by Fstrnyou »

Interesting turn of events. I just got the above error after hitting Ctrl-A on an ignition table. VT crashed. When I opened it back up, the OTS tunes were back.
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: VersaTuner 1.12.0 released

Post by mituc »

Fstrnyou wrote: I too have experienced that error. Working with large tables. Had to click OK about 100 times to get rid of all those windows.
Right-click on the Versatuer icon in the task bar and chose Close, it will ask you if you want to save the current tune, save it, and then if you click OK it will not open even more dialog boxes. Then you can go back and edit your tune without even closing VT, just remember what table were you at because that is only partially changed. it may be some undo index/array which overfills or something.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
alleks3006
Posts: 6
Joined: May 28th, 2016, 11:58 am

Re: VersaTuner 1.12.0 released

Post by alleks3006 »

Добрый день! Скажите пожалуйста как работают карты Fan Control (Fan on engine coolant temperature, Fan on voltage ajustment) ?
User avatar
Ugnius @ VersaTune
Lead developer
Posts: 580
Joined: March 19th, 2010, 11:57 am

Re: VersaTuner 1.12.0 released

Post by Ugnius @ VersaTune »

alleks3006 wrote:Добрый день! Скажите пожалуйста как работают карты Fan Control (Fan on engine coolant temperature, Fan on voltage ajustment) ?

Для какого автомобиля? Карты управления вентилятором для платформ на базе двигателя MZR DISI пока полностью неработают. Мы анализируем, какие дополнительные карты нужны для полного управления.
alleks3006
Posts: 6
Joined: May 28th, 2016, 11:58 am

Re: VersaTuner 1.12.0 released

Post by alleks3006 »

Автомобиль Мазда CX7 2008г. (L3K9 2,3t). Жаль, что управление вентилятором не работает , было бы хорошо управлять вентиляторами Спасибо за ваш труд!
alleks3006
Posts: 6
Joined: May 28th, 2016, 11:58 am

Re: VersaTuner 1.12.0 released

Post by alleks3006 »

Здравствуйте! Возник вопрос, карта" knock retard additive" выше 1,663 лоада не работает, я правильно понял?
alleks3006
Posts: 6
Joined: May 28th, 2016, 11:58 am

Re: VersaTuner 1.12.0 released

Post by alleks3006 »

alleks3006 wrote:Здравствуйте! Возник вопрос, карта" knock retard additive" выше 1,663 лоада не работает, я правильно понял?
Извиняюсь за глупые вопросы. По моему я разобрался в причине. Скорее всего богатит смесь после 1,663 при малейшем ноке из-за того что у меня в карте "knock retard Multiplier"в промежутке 2500-5000 RPM прописан множитель "2". Надо проверить на практике.
Project_cx7
Posts: 35
Joined: July 19th, 2015, 10:37 pm

Re: VersaTuner 1.12.0 released

Post by Project_cx7 »

Thanks steve. I was wondering why my mech gauge was reading 13 psi and my intake manifold pressure was reading 20 psi.
2007 Mazda CX-7. Manley H-beam rods, Wiseco 88 mm pistons, King racing bearings, balance the crankshaft, bosch 3 bar map sensor, removed VTCS and egr, JB OCC, JB 3.5 inch intake, FMIC, Forge v1 BPV, BNR S3 turbo, 3 inch catless DP.
RX8CLUBJCB
Posts: 5
Joined: October 30th, 2016, 10:08 pm

Re: VersaTuner 1.12.0 released

Post by RX8CLUBJCB »

FYI after playing around with some of the tunes that I've been working on for the series 2 RX-8, I figured out what the rev limiter unknown 1 is. Forgive me for not knowing the technical name but it's the idle max limit. it currently has the default preset of 6500 rpm which made it pretty easy to figure out. The down side it that is have not a clue what the rev limiter unknown 2 is for. the second one has a preset for 2500 which I assume is the limit for when the engine turns over.
Post Reply