VersaTuner for 2016- (ND) MX-5 Miata Now Available

Global Forum and VersaTune company related announcements.
Franktow
Posts: 2
Joined: April 5th, 2019, 3:50 pm
Location: Bulgaria
Contact:

VersaTuner for 2016 ND MX 5 Miata Now Available

Post by Franktow »

Damn you to HELLLLLLLLLLL. Now I have to go find 8K. Anyone know the odds of pulling off a bank job? I'm more than tempted to sell my MSM, buy the kit and 2 cheap miata's, parts and driver.
SirLevi
Posts: 15
Joined: June 13th, 2019, 5:00 am
Location: New York

Re: VersaTuner for 2016- (ND) MX-5 Miata Now Available

Post by SirLevi »

This is good news.

Recently purchased VT from Fab9.

Looking forward to Brian's work on my ND Miata.
elektron
Posts: 0
Joined: June 13th, 2019, 9:26 am

Re: VersaTuner for 2016- (ND) MX-5 Miata Now Available

Post by elektron »

I just installed ND VersaTuner sw to my ND 2016 from you (93map). It is awesome :beertoast . Did not know that only sw could make so much difference without any other hw modifications. We are in progress of header exchange, in the future, than would like to make dyno run and compare stock map vs. 93map and new map with aftermarket header. I will post it here then. Thank you very, from Slovakia, Europe.
SirLevi
Posts: 15
Joined: June 13th, 2019, 5:00 am
Location: New York

Re: VersaTuner for 2016- (ND) MX-5 Miata Now Available

Post by SirLevi »

Posted this Error message when trying to Identify my car using ODBLink SX on my 2018 ND RF Club.

Error: Your ECU is currently running firmware that is not currently supported by this version of Versatuner...ECU Code PSRPEC00xxx...

Looking forward to get this resolved.
SirLevi
Posts: 15
Joined: June 13th, 2019, 5:00 am
Location: New York

Re: VersaTuner for 2016- (ND) MX-5 Miata Now Available

Post by SirLevi »

The issue has been resolved. Thanks Ignius for the quick turn around.

I would like to collect data using VersaTuner.

What are the parameters I should load for data logging?
User avatar
Ugnius @ VersaTune
Lead developer
Posts: 580
Joined: March 19th, 2010, 11:57 am

Re: VersaTuner for 2016- (ND) MX-5 Miata Now Available

Post by Ugnius @ VersaTune »

Just expand the list of presets at the top of the dashboard screen and load the "General Performance" one.
SirLevi
Posts: 15
Joined: June 13th, 2019, 5:00 am
Location: New York

Re: VersaTuner for 2016- (ND) MX-5 Miata Now Available

Post by SirLevi »

Got it "General Performance" preset.

Just ordered a right-angle ODBII adapter so I can start collecting logs. OEM connector is over the clutch pedal.

Thanks again Ugnius.
Shadgrind
Posts: 1
Joined: July 13th, 2019, 1:46 am

Re: VersaTuner for 2016- (ND) MX-5 Miata Now Available

Post by Shadgrind »

Do you do a tune for the MX5 ND 181BHP 2.0L? :burnrubber
User avatar
Ugnius @ VersaTune
Lead developer
Posts: 580
Joined: March 19th, 2010, 11:57 am

Re: VersaTuner for 2016- (ND) MX-5 Miata Now Available

Post by Ugnius @ VersaTune »

Shadgrind wrote:Do you do a tune for the MX5 ND 181BHP 2.0L? :burnrubber
That ECU is based on an entirely different platform, it uses a different processor, larger memory, different encryption. It will take a significant amount of time and effort to add support for it.
SirLevi
Posts: 15
Joined: June 13th, 2019, 5:00 am
Location: New York

Re: VersaTuner for 2016- (ND) MX-5 Miata Now Available

Post by SirLevi »

Thank you for the support Ugnius!

Are there specific procedures in data logging?

Flooring the accelerator pedal on 2nd gear at 2000-4500 RPM...

I am recording KR -4.0 Max on 93 OCT stock tune. Intake temp is 200deg F, oil temp is 180deg F.

Please advice,
Levi
Post Reply