VersaTuner 1.10.0 Released

Global Forum and VersaTune company related announcements.
User avatar
Ugnius @ VersaTune
Lead developer
Posts: 580
Joined: March 19th, 2010, 11:57 am

Re: VersaTuner 1.10.0 Released

Post by Ugnius @ VersaTune »

1.10.1 hotfix has been released. It addresses the issue with Tune Customizer settings not being saved correctly.
Please check your inboxes for download links.
snardos
Posts: 1
Joined: November 27th, 2015, 9:20 pm

Re: VersaTuner 1.10.0 Released

Post by snardos »

Any chance the PLX Kiwi Bluetooth can work with this? I get a CAN error when I try to connect.
User avatar
Ugnius @ VersaTune
Lead developer
Posts: 580
Joined: March 19th, 2010, 11:57 am

Re: VersaTuner 1.10.0 Released

Post by Ugnius @ VersaTune »

Could you please email us the screenshot of the error that you get?
We should be able to get it work, its API seems to be ELM327 compliant.
snardos
Posts: 1
Joined: November 27th, 2015, 9:20 pm

Re: VersaTuner 1.10.0 Released

Post by snardos »

Actually, it is working now. I didn't change anything but I did use a hard wired connection with an openport 2.0 before trying Bluetooth again. Data acquisition is quite slow with this device but I think it will be sufficient.
Enki
Posts: 43
Joined: December 2nd, 2014, 9:13 pm

Re: VersaTuner 1.10.0 Released

Post by Enki »

I have personal experience with the PLX Kiwi, and it is indeed on the slower end of the spectrum as far as BT devices go.
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: VersaTuner 1.10.0 Released

Post by mituc »

Can the boost be configured to use another MAP pid to calculate boost? it seems to be using only the factory Manifold Absolute Pressure PID without being able to configure it to use the Bosch 3 or 3.5BAR PIDs.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
MPS dude
Posts: 5
Joined: March 7th, 2015, 12:28 pm

Re: VersaTuner 1.10.0 Released

Post by MPS dude »

how can I delete Vehicle interfaces? I added some wrong ones and there is only an ad a bluetooth device button.
User avatar
Ugnius @ VersaTune
Lead developer
Posts: 580
Joined: March 19th, 2010, 11:57 am

Re: VersaTuner 1.10.0 Released

Post by Ugnius @ VersaTune »

MPS dude wrote:how can I delete Vehicle interfaces? I added some wrong ones and there is only an ad a bluetooth device button.
Please find the Bluetooth icon in your notification area (in the task bar next to the clock), right click it and select "Show Bluetooth Devices".
A window will appear listing all Bluetooth devices paired with your computer. Then right click and delete the ones that you don't need.

If this approach does not work, you can try opening the Control Panel, then going to "Devices and Printers" and removing the devices that you don't need.
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: VersaTuner 1.10.0 Released

Post by mituc »

Today I finally took the first logs with VT 1.10.0. Man, those logs look good finally! But they look so good...
Even KR is 0.35 and not, say, 0.15 and 0.20 in next cel. Looks like the interpolation has been significantly changed, it's still there but not as aggressive as before. My eyes go through these logs a lot easier!

Thank you!
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Post Reply