1. same scale for multiple PIDs (targeted/actual AFR)
2. changing unit of measure in log viewer (psi to bar, deduct atmospheric pressure, for example)
3. exporting to CSV/excel (with interpolated data points/same timestamp if possible)
4. manual axis scale setting
5. if it's possible, some "lookup" PIDs in log viewer (for example, lookup the targeted load in the current tune [by rpm, gear, etc], and display it together with actual load)
6. Dyno chart generation (I've sent calculation details to Ugnius)
7. option to toggle all pids on/off/reverse in log viewer
8. option to interpolate in tune editor
9. option to reset to stock for cell/table, option to undo edit, option to reset to last saved
10. ability to compare two different tunes in an easy change identifiable way
so much for now
sum of my feature requests :)
Re: sum of my feature requests :)
few more:
11) allow leaner than 1.1 in fuel targeting
12) allow to disable P2096
13) allow 35 in VVT
14) link tables in editor for comparison/easy jumping (say from load to ignition to fueling etc, in same coordinates)
15) auto log cleanup or run detection
11) allow leaner than 1.1 in fuel targeting
12) allow to disable P2096
13) allow 35 in VVT
14) link tables in editor for comparison/easy jumping (say from load to ignition to fueling etc, in same coordinates)
15) auto log cleanup or run detection