sum of my feature requests :)

Post your feature requests here.
Post Reply
mrQQ
Posts: 64
Joined: November 25th, 2010, 6:06 pm

sum of my feature requests :)

Post by mrQQ »

1. same scale for multiple PIDs (targeted/actual AFR)
2. changing unit of measure in log viewer (psi to bar, deduct atmospheric pressure, for example)
3. exporting to CSV/excel (with interpolated data points/same timestamp if possible)
4. manual axis scale setting
5. if it's possible, some "lookup" PIDs in log viewer (for example, lookup the targeted load in the current tune [by rpm, gear, etc], and display it together with actual load)
6. Dyno chart generation (I've sent calculation details to Ugnius)
7. option to toggle all pids on/off/reverse in log viewer
8. option to interpolate in tune editor
9. option to reset to stock for cell/table, option to undo edit, option to reset to last saved
10. ability to compare two different tunes in an easy change identifiable way

so much for now :)
mrQQ
Posts: 64
Joined: November 25th, 2010, 6:06 pm

Re: sum of my feature requests :)

Post by mrQQ »

few more:

11) allow leaner than 1.1 in fuel targeting
12) allow to disable P2096
13) allow 35 in VVT
14) link tables in editor for comparison/easy jumping (say from load to ignition to fueling etc, in same coordinates)
15) auto log cleanup or run detection
Post Reply