STFT in open loop

Post your feature requests here.
User avatar
YuraL
Posts: 61
Joined: December 28th, 2011, 3:39 pm
Location: Ukraine
Contact:

Re: STFT in open loop

Post by YuraL »

Checked with D07 methanol nozzle. The mixture is fine.
Topic can be closed. :oops
400+ Mazda6 MPS
ATP GTX3071, AEM SRI, CPe TIP, Treadstone TR11 FMIC, 3" Rud Exhaust, KMD HPFP, Methanol Injection Kit, CP Forged Pistons, K1 Forged Rods
Tuned with Image
User avatar
YuraL
Posts: 61
Joined: December 28th, 2011, 3:39 pm
Location: Ukraine
Contact:

Re: STFT in open loop

Post by YuraL »

No, I'm not a fool. Today I found the cause of their troubles.
The problems started after I got 1.6.2 version of VersaTuner and increased the maximum duty cycle of the injectors from 80% to 100%.
The mixture became richer by 10-12% in OL mode.
I had to recalibrate the MAF, reducing the values by 12%.

I don't know why is it so happened.
400+ Mazda6 MPS
ATP GTX3071, AEM SRI, CPe TIP, Treadstone TR11 FMIC, 3" Rud Exhaust, KMD HPFP, Methanol Injection Kit, CP Forged Pistons, K1 Forged Rods
Tuned with Image
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: STFT in open loop

Post by mituc »

It should affect only the maximum values, and from what you say I understand that un OL they were actually scaled with about 10-12% (100/80=1.25). I wonder if this is the expected behaviour, as I have the same version too because I'm going to start tuning my big turbo setup this wednesday.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
User avatar
manselainen
Posts: 109
Joined: October 21st, 2011, 3:56 pm

Re: STFT in open loop

Post by manselainen »

Thanks YuraL! I have the same version but didn't notice the Max. injector DC variable before. I increased it 80->90, lets's see what happens. I didn't reach load targets before.
Tuned with Image by Image

3 MPS '07, BNR S3, ported IM, VTCS delete, test pipe, PTP HPFP internals, RMM
mrQQ
Posts: 64
Joined: November 25th, 2010, 6:06 pm

Re: STFT in open loop

Post by mrQQ »

actually, I also think it does some OL adjustment, as I mostly hit my targets even without perfect MAF calibration..
Post Reply