VersaTune User Forum

is it possible to interrogate the ecu to view what LTFT's it is using for all the break point?

It is possible, but would require custom code on the ECU.

Is this like getting the CL MAF cal directly from the ECU? This would be something...

You can see the current LTFT by logging it. You know which break point you are in by logging MAF g/s. If you gradually bring up the load and RPMs and stay in CL, you can get the LTFT data.

I just thought it might be useful to have the facility to see what was stored in the ecu

I appreciate this info can be accessed by logging, but it could make the calibration process so much quicker