Share your MAF Calibration

Tuning discussion for all first generation Mazda 2.3 MZR DISI Turbo powered vehicles

Re: Share your MAF Calibration

by joey » November 22nd, 2015, 1:53 pm

mituc wrote:Try here: http://www.mazdaspeedforums.org/forum/f ... es-124734/
There's a HTP 4" MAF CAL which Stratified says it's beta but as a baseline will work just fine.

I can kiss you lol thanks so much

Sent from my SM-G900F
Versatune,FMIC,3"SRI,3"TIP,HKSSSQv4,3"Turboback,Devil'sOwnWMIStg2kit,AutotechHPFP,JBREGRdelete,JBRBSD&Baffleplate,RacingLogiccoilovers,TRZTMM,AWRPMM,SURERMM,SUREShortcut&Counterweight,SUREg/knob,ApexiTT,HDIStg2Evoboostcontroller
User avatar
 
Posts: 51
Joined: November 2nd, 2011, 8:12 am
Location: South Afirca

Re: Share your MAF Calibration

by mituc » December 9th, 2017, 8:48 pm

This MAF cal is for stock intake cars running with european gas. So wherever you are in Europe use this MAF cal because the newer regulations require oxygenated additives in higher quantities than when these cars were calibrated during their factory development back in 2005-2006.
Attachments
MAF_CAL_20171011-stock-intake.csv
(1.12 KiB) Downloaded 120 times
2008 Cosmic Blue Mazda 3MPS
Build engine + WMI + GTX3071, ~476WHP @31-31PSI
2008 Icy Blue Mazda CX7
Stock engine, intake and exhaust (YES!!), GTX2867 gen2 + Autotech HPFP, self-tuned to 320-ish BHP
VersaTuner guru
 
Posts: 820
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: Share your MAF Calibration

by mituc » July 31st, 2018, 5:39 am

JBR 3.5" Silicone.
Attachments
MAF_CAL-JBR-Silicone-35inch.csv
(3.38 KiB) Downloaded 89 times
2008 Cosmic Blue Mazda 3MPS
Build engine + WMI + GTX3071, ~476WHP @31-31PSI
2008 Icy Blue Mazda CX7
Stock engine, intake and exhaust (YES!!), GTX2867 gen2 + Autotech HPFP, self-tuned to 320-ish BHP
VersaTuner guru
 
Posts: 820
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: Share your MAF Calibration

by ST-Autosport » May 24th, 2019, 9:29 pm

started doing my first MPS based MAF cal on en gen1 mps with an internally upgraded K04, this is such a long and tedious task, i downloaded the verstatune MAF rescale worksheet, does this mean i need to insert all the data manually? my first adjustment took me +2hours yesterday.

nobody ever wrote a little maf scale tool for the MPS community??
i'm used to tune GT86/BRZ , maf scale tuning is so easy, just insert log in the tool, insert OL fuelmap en orginal maf scale and it calculates all the adjustments for you, automatically.

someone should really write something like this for the MPS :bow
http://www.romraider.com/forum/viewtopi ... 32&t=10481
 
Posts: 3
Joined: June 29th, 2018, 9:30 pm

Re: Share your MAF Calibration

by Ugnius @ VersaTune » May 25th, 2019, 4:24 am

We feel your pain.. That is definitely high on our to-do list.
User avatar
Lead developer
 
Posts: 341
Joined: March 19th, 2010, 11:57 am

Re: Share your MAF Calibration

by mituc » May 27th, 2019, 11:24 am

ST-Autosport wrote:started doing my first MPS based MAF cal on en gen1 mps with an internally upgraded K04, this is such a long and tedious task, i downloaded the verstatune MAF rescale worksheet, does this mean i need to insert all the data manually? my first adjustment took me +2hours yesterday.


What intake do you have? Maybe I already have a MAF cal for yours. I usually get the MAF cals within 1-2% so if I already have one it will be good enough considering you're in Europe so we're using similar fuels.
2008 Cosmic Blue Mazda 3MPS
Build engine + WMI + GTX3071, ~476WHP @31-31PSI
2008 Icy Blue Mazda CX7
Stock engine, intake and exhaust (YES!!), GTX2867 gen2 + Autotech HPFP, self-tuned to 320-ish BHP
VersaTuner guru
 
Posts: 820
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: Share your MAF Calibration

by ST-Autosport » June 7th, 2019, 8:26 am

anyone have a good base MAF curve for a BNR S3 turbo ?

setup is like this now:
gen2 MS3
BNR S3 turbo
3" corqsport intake
corksport EBC solenoid
autotech HPFP
big top mount intercooler
spark plugs one range colder
catless downpipe
catless frontpipe
catback

do i need to make adjustments for the EBC solenoid? lower DC or something?
 
Posts: 3
Joined: June 29th, 2018, 9:30 pm

Re: Share your MAF Calibration

by mituc » June 8th, 2019, 3:43 am

The MAF calibration is for the intake, not for the turbo...
http://www.mazdaspeedforums.org/forum/f ... es-124734/
2008 Cosmic Blue Mazda 3MPS
Build engine + WMI + GTX3071, ~476WHP @31-31PSI
2008 Icy Blue Mazda CX7
Stock engine, intake and exhaust (YES!!), GTX2867 gen2 + Autotech HPFP, self-tuned to 320-ish BHP
VersaTuner guru
 
Posts: 820
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Previous

Who is online
Users browsing this forum: No registered users and 1 guest