Share your MAF Calibration

Tuning discussion for all first generation Mazda 2.3 MZR DISI Turbo powered vehicles
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: Share your MAF Calibration

Post by mituc »

At that diameter you can try a cobb SRI maf cal.
But you have to understand you need to make your own to get it perfect.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
User avatar
keridil
Posts: 58
Joined: March 2nd, 2012, 6:05 am
Location: Asturias / Spain

Re: Share your MAF Calibration

Post by keridil »

EPTSpeed3 wrote:Anyone have a Maf Cal for me to start at for a Sure SRI with Inlet hose?
I'll send you mine in a few hours is around 3%

Sent from my Nexus 4 using Tapatalk 2
Mazda 6 MPS, BPV GFB, RX-8 wheels, B8 + Eibach Pro-Kit, CS 3" SRI, GS EBCS (interrupt), CS 3" TMIC, EGR off, HPFP internals, CS catted downpipe, 3 bar MAP, BNRS3, forged engine and stuff
User avatar
keridil
Posts: 58
Joined: March 2nd, 2012, 6:05 am
Location: Asturias / Spain

Re: Share your MAF Calibration

Post by keridil »

EPTSpeed3 wrote:Anyone have a Maf Cal for me to start at for a Sure SRI with Inlet hose?
There you go.
Attachments
SURE SRI-TIP MAF Cal.zip
SURE SRI + TIP MAF Cal
(9.2 KiB) Downloaded 962 times
Mazda 6 MPS, BPV GFB, RX-8 wheels, B8 + Eibach Pro-Kit, CS 3" SRI, GS EBCS (interrupt), CS 3" TMIC, EGR off, HPFP internals, CS catted downpipe, 3 bar MAP, BNRS3, forged engine and stuff
EPTSpeed3
Posts: 17
Joined: February 20th, 2013, 8:30 pm

Re: Share your MAF Calibration

Post by EPTSpeed3 »

Awesome thanks! did see you posted one!
snoogans
Posts: 2
Joined: October 12th, 2013, 9:36 pm

Re: Share your MAF Calibration

Post by snoogans »

Hi yall, if anybody happens to have maf cal for a hks intake that would be much appreciated.
User avatar
keridil
Posts: 58
Joined: March 2nd, 2012, 6:05 am
Location: Asturias / Spain

Re: Share your MAF Calibration

Post by keridil »

snoogans wrote:Hi yall, if anybody happens to have maf cal for a hks intake that would be much appreciated.
Did you get one? I'm finishing one with a friend, I will post it here!
Mazda 6 MPS, BPV GFB, RX-8 wheels, B8 + Eibach Pro-Kit, CS 3" SRI, GS EBCS (interrupt), CS 3" TMIC, EGR off, HPFP internals, CS catted downpipe, 3 bar MAP, BNRS3, forged engine and stuff
snoogans
Posts: 2
Joined: October 12th, 2013, 9:36 pm

Re: Share your MAF Calibration

Post by snoogans »

keridil wrote:
snoogans wrote:Hi yall, if anybody happens to have maf cal for a hks intake that would be much appreciated.
Did you get one? I'm finishing one with a friend, I will post it here!
yes I have the hks intake and I have been running a map from a corksport that my buddy had emailed me. I still need a maf cal for the hks
User avatar
keridil
Posts: 58
Joined: March 2nd, 2012, 6:05 am
Location: Asturias / Spain

Re: Share your MAF Calibration

Post by keridil »

snoogans wrote:
keridil wrote:
snoogans wrote:Hi yall, if anybody happens to have maf cal for a hks intake that would be much appreciated.
Did you get one? I'm finishing one with a friend, I will post it here!
yes I have the hks intake and I have been running a map from a corksport that my buddy had emailed me. I still need a maf cal for the hks
Hi there snoogans, find attached the MAF calibration that we are using. Probably it will need some revision for your car. I tried to see why it deviates so much from what it was expected and that is why you will find a chart in the Excel sheet too.

Kind regards.
Attachments
MAF Cal HKS-TIH.zip
(33.29 KiB) Downloaded 902 times
Mazda 6 MPS, BPV GFB, RX-8 wheels, B8 + Eibach Pro-Kit, CS 3" SRI, GS EBCS (interrupt), CS 3" TMIC, EGR off, HPFP internals, CS catted downpipe, 3 bar MAP, BNRS3, forged engine and stuff
User avatar
joey
Posts: 51
Joined: November 2nd, 2011, 8:12 am
Location: South Afirca

Re: Share your MAF Calibration

Post by joey »

Anyone have a 4" complete sri maf cal? I can do the fine tuning, but i need a good baseline pls. Thanks in advance

Sent from my SM-G900F
Versatune,FMIC,3"SRI,3"TIP,HKSSSQv4,3"Turboback,Devil'sOwnWMIStg2kit,AutotechHPFP,JBREGRdelete,JBRBSD&Baffleplate,RacingLogiccoilovers,TRZTMM,AWRPMM,SURERMM,SUREShortcut&Counterweight,SUREg/knob,ApexiTT,HDIStg2Evoboostcontroller
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: Share your MAF Calibration

Post by mituc »

Try here: http://www.mazdaspeedforums.org/forum/f ... es-124734/
There's a HTP 4" MAF CAL which Stratified says it's beta but as a baseline will work just fine.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Post Reply