Share your MAF Calibration

Tuning discussion for all first generation Mazda 2.3 MZR DISI Turbo powered vehicles
User avatar
joey
Posts: 51
Joined: November 2nd, 2011, 8:12 am
Location: South Afirca

Re: Share your MAF Calibration

Post by joey »

mituc wrote:Try here: http://www.mazdaspeedforums.org/forum/f ... es-124734/
There's a HTP 4" MAF CAL which Stratified says it's beta but as a baseline will work just fine.
I can kiss you lol thanks so much

Sent from my SM-G900F
Versatune,FMIC,3"SRI,3"TIP,HKSSSQv4,3"Turboback,Devil'sOwnWMIStg2kit,AutotechHPFP,JBREGRdelete,JBRBSD&Baffleplate,RacingLogiccoilovers,TRZTMM,AWRPMM,SURERMM,SUREShortcut&Counterweight,SUREg/knob,ApexiTT,HDIStg2Evoboostcontroller
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: Share your MAF Calibration

Post by mituc »

This MAF cal is for stock intake cars running with european gas. So wherever you are in Europe use this MAF cal because the newer regulations require oxygenated additives in higher quantities than when these cars were calibrated during their factory development back in 2005-2006.
Attachments
MAF_CAL_20171011-stock-intake.csv
(1.12 KiB) Downloaded 686 times
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: Share your MAF Calibration

Post by mituc »

JBR 3.5" Silicone.
Attachments
MAF_CAL-JBR-Silicone-35inch.csv
(3.38 KiB) Downloaded 727 times
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
ST-Autosport
Posts: 5
Joined: June 29th, 2018, 9:30 pm

Re: Share your MAF Calibration

Post by ST-Autosport »

started doing my first MPS based MAF cal on en gen1 mps with an internally upgraded K04, this is such a long and tedious task, i downloaded the verstatune MAF rescale worksheet, does this mean i need to insert all the data manually? my first adjustment took me +2hours yesterday.

nobody ever wrote a little maf scale tool for the MPS community??
i'm used to tune GT86/BRZ , maf scale tuning is so easy, just insert log in the tool, insert OL fuelmap en orginal maf scale and it calculates all the adjustments for you, automatically.

someone should really write something like this for the MPS :bow
http://www.romraider.com/forum/viewtopi ... 32&t=10481
User avatar
Ugnius @ VersaTune
Lead developer
Posts: 580
Joined: March 19th, 2010, 11:57 am

Re: Share your MAF Calibration

Post by Ugnius @ VersaTune »

We feel your pain.. That is definitely high on our to-do list.
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: Share your MAF Calibration

Post by mituc »

ST-Autosport wrote:started doing my first MPS based MAF cal on en gen1 mps with an internally upgraded K04, this is such a long and tedious task, i downloaded the verstatune MAF rescale worksheet, does this mean i need to insert all the data manually? my first adjustment took me +2hours yesterday.
What intake do you have? Maybe I already have a MAF cal for yours. I usually get the MAF cals within 1-2% so if I already have one it will be good enough considering you're in Europe so we're using similar fuels.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
ST-Autosport
Posts: 5
Joined: June 29th, 2018, 9:30 pm

Re: Share your MAF Calibration

Post by ST-Autosport »

anyone have a good base MAF curve for a BNR S3 turbo ?

setup is like this now:
gen2 MS3
BNR S3 turbo
3" corqsport intake
corksport EBC solenoid
autotech HPFP
big top mount intercooler
spark plugs one range colder
catless downpipe
catless frontpipe
catback

do i need to make adjustments for the EBC solenoid? lower DC or something?
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: Share your MAF Calibration

Post by mituc »

The MAF calibration is for the intake, not for the turbo...
http://www.mazdaspeedforums.org/forum/f ... es-124734/
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Ianstattoos
Posts: 18
Joined: July 19th, 2020, 2:11 am

Re: Share your MAF Calibration

Post by Ianstattoos »

Hi I would be super grateful if anyone has a maf cal for CorkSport stage 2 Sri. I’m new to VT and tuning in general. I read the maf cal 101 post and I know I wouldnt stand a chance doing it and will probably mess it up.
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: Share your MAF Calibration

Post by mituc »

With the CS Stage II you can start with the factory MAF calibration because it's stock size.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Post Reply