At that diameter you can try a cobb SRI maf cal.
But you have to understand you need to make your own to get it perfect.
Share your MAF Calibration
Re: Share your MAF Calibration
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Re: Share your MAF Calibration
I'll send you mine in a few hours is around 3%EPTSpeed3 wrote:Anyone have a Maf Cal for me to start at for a Sure SRI with Inlet hose?
Sent from my Nexus 4 using Tapatalk 2
Mazda 6 MPS, BPV GFB, RX-8 wheels, B8 + Eibach Pro-Kit, CS 3" SRI, GS EBCS (interrupt), CS 3" TMIC, EGR off, HPFP internals, CS catted downpipe, 3 bar MAP, BNRS3, forged engine and stuff
Re: Share your MAF Calibration
There you go.EPTSpeed3 wrote:Anyone have a Maf Cal for me to start at for a Sure SRI with Inlet hose?
- Attachments
-
- SURE SRI-TIP MAF Cal.zip
- SURE SRI + TIP MAF Cal
- (9.2 KiB) Downloaded 994 times
Mazda 6 MPS, BPV GFB, RX-8 wheels, B8 + Eibach Pro-Kit, CS 3" SRI, GS EBCS (interrupt), CS 3" TMIC, EGR off, HPFP internals, CS catted downpipe, 3 bar MAP, BNRS3, forged engine and stuff
Re: Share your MAF Calibration
Awesome thanks! did see you posted one!
Re: Share your MAF Calibration
Hi yall, if anybody happens to have maf cal for a hks intake that would be much appreciated.
Re: Share your MAF Calibration
Did you get one? I'm finishing one with a friend, I will post it here!snoogans wrote:Hi yall, if anybody happens to have maf cal for a hks intake that would be much appreciated.
Mazda 6 MPS, BPV GFB, RX-8 wheels, B8 + Eibach Pro-Kit, CS 3" SRI, GS EBCS (interrupt), CS 3" TMIC, EGR off, HPFP internals, CS catted downpipe, 3 bar MAP, BNRS3, forged engine and stuff
Re: Share your MAF Calibration
yes I have the hks intake and I have been running a map from a corksport that my buddy had emailed me. I still need a maf cal for the hkskeridil wrote:Did you get one? I'm finishing one with a friend, I will post it here!snoogans wrote:Hi yall, if anybody happens to have maf cal for a hks intake that would be much appreciated.
Re: Share your MAF Calibration
Hi there snoogans, find attached the MAF calibration that we are using. Probably it will need some revision for your car. I tried to see why it deviates so much from what it was expected and that is why you will find a chart in the Excel sheet too.snoogans wrote:yes I have the hks intake and I have been running a map from a corksport that my buddy had emailed me. I still need a maf cal for the hkskeridil wrote:Did you get one? I'm finishing one with a friend, I will post it here!snoogans wrote:Hi yall, if anybody happens to have maf cal for a hks intake that would be much appreciated.
Kind regards.
- Attachments
-
- MAF Cal HKS-TIH.zip
- (33.29 KiB) Downloaded 932 times
Mazda 6 MPS, BPV GFB, RX-8 wheels, B8 + Eibach Pro-Kit, CS 3" SRI, GS EBCS (interrupt), CS 3" TMIC, EGR off, HPFP internals, CS catted downpipe, 3 bar MAP, BNRS3, forged engine and stuff
Re: Share your MAF Calibration
Anyone have a 4" complete sri maf cal? I can do the fine tuning, but i need a good baseline pls. Thanks in advance
Sent from my SM-G900F
Sent from my SM-G900F
Versatune,FMIC,3"SRI,3"TIP,HKSSSQv4,3"Turboback,Devil'sOwnWMIStg2kit,AutotechHPFP,JBREGRdelete,JBRBSD&Baffleplate,RacingLogiccoilovers,TRZTMM,AWRPMM,SURERMM,SUREShortcut&Counterweight,SUREg/knob,ApexiTT,HDIStg2Evoboostcontroller
Re: Share your MAF Calibration
Try here: http://www.mazdaspeedforums.org/forum/f ... es-124734/
There's a HTP 4" MAF CAL which Stratified says it's beta but as a baseline will work just fine.
There's a HTP 4" MAF CAL which Stratified says it's beta but as a baseline will work just fine.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP