VersaTune User Forum

mituc wrote:Try here: http://www.mazdaspeedforums.org/forum/f ... es-124734/
There's a HTP 4" MAF CAL which Stratified says it's beta but as a baseline will work just fine.

I can kiss you lol thanks so much

Sent from my SM-G900F

This MAF cal is for stock intake cars running with european gas. So wherever you are in Europe use this MAF cal because the newer regulations require oxygenated additives in higher quantities than when these cars were calibrated during their factory development back in 2005-2006.

JBR 3.5" Silicone.

started doing my first MPS based MAF cal on en gen1 mps with an internally upgraded K04, this is such a long and tedious task, i downloaded the verstatune MAF rescale worksheet, does this mean i need to insert all the data manually? my first adjustment took me +2hours yesterday.

nobody ever wrote a little maf scale tool for the MPS community??
i'm used to tune GT86/BRZ , maf scale tuning is so easy, just insert log in the tool, insert OL fuelmap en orginal maf scale and it calculates all the adjustments for you, automatically.

someone should really write something like this for the MPS
http://www.romraider.com/forum/viewtopi ... 32&t=10481

We feel your pain.. That is definitely high on our to-do list.

ST-Autosport wrote:started doing my first MPS based MAF cal on en gen1 mps with an internally upgraded K04, this is such a long and tedious task, i downloaded the verstatune MAF rescale worksheet, does this mean i need to insert all the data manually? my first adjustment took me +2hours yesterday.

What intake do you have? Maybe I already have a MAF cal for yours. I usually get the MAF cals within 1-2% so if I already have one it will be good enough considering you're in Europe so we're using similar fuels.

anyone have a good base MAF curve for a BNR S3 turbo ?

setup is like this now:
gen2 MS3
BNR S3 turbo
3" corqsport intake
corksport EBC solenoid
autotech HPFP
big top mount intercooler
spark plugs one range colder
catless downpipe
catless frontpipe
catback

do i need to make adjustments for the EBC solenoid? lower DC or something?

The MAF calibration is for the intake, not for the turbo...
http://www.mazdaspeedforums.org/forum/f ... es-124734/

Hi I would be super grateful if anyone has a maf cal for CorkSport stage 2 Sri. I’m new to VT and tuning in general. I read the maf cal 101 post and I know I wouldnt stand a chance doing it and will probably mess it up.

With the CS Stage II you can start with the factory MAF calibration because it's stock size.