OL Maf cal

Kevin · Post by **Kevin** » January 7th, 2012, 4:50 am

Hi guys

Just a question, Ive made 11 WOT logs to calibrate the higher voltages. Out of the 11 made Ive only found 7 voltages. Is there any easier way to do this?

skiptownmcat · Post by **skiptownmcat** » January 7th, 2012, 6:38 am

What is the maximum voltage ~4.52v?
As you start to climb, the acceleration rate of the airflow slows down so the last couple of k is spread out over only a few voltages.

Kevin · Post by **Kevin** » January 7th, 2012, 6:40 am

My max voltage is only 4V...

Kevin · Post by **Kevin** » January 7th, 2012, 6:41 am

Im missing almost all voltages between 3 and 4

skiptownmcat · Post by **skiptownmcat** » January 7th, 2012, 6:45 am

Do the log again, flat foot from 2500 rpm in 4th

Kevin · Post by **Kevin** » January 7th, 2012, 7:46 am

Ive done it so many times...everytime the same result

skiptownmcat · Post by **skiptownmcat** » January 7th, 2012, 7:57 am

Post a log up and I'll have a look.

Kevin · Post by **Kevin** » January 7th, 2012, 8:02 am

Cool, will post my 4th gear wot logs just now

skiptownmcat · Post by **skiptownmcat** » January 7th, 2012, 8:10 am

i'm at work at the minute but I'll get to them ASAP.

Kevin · Post by **Kevin** » January 7th, 2012, 8:17 am

Logs I made yesterday and this morning

OL Maf cal

OL Maf cal

Re: OL Maf cal

OL Maf cal

OL Maf cal

Re: OL Maf cal

OL Maf cal

Re: OL Maf cal

OL Maf cal

Re: OL Maf cal

Re: OL Maf cal

About us

Contacts

Links