OL Maf cal
-
- Posts: 383
- Joined: August 3rd, 2011, 11:29 am
Re: OL Maf cal
you are not commanding enough load to reach higher airflow, what tune are you using?
Re: OL Maf cal
Im using the base 91US/95EU map.
Im not hitting the commanded loads, wonder if it might be as a result of the higher BAT's.
Think the commanded loads are like 1.6 / 1.7, but im only able to hit around 1.4
Im not hitting the commanded loads, wonder if it might be as a result of the higher BAT's.
Think the commanded loads are like 1.6 / 1.7, but im only able to hit around 1.4
-
- Posts: 383
- Joined: August 3rd, 2011, 11:29 am
Re: OL Maf cal
Boost leak? Maybe change the high bat loads. Idk, steve will have the right advice.
Re: OL Maf cal
Dont think I have a boost leak. is around 1 / 1.1 bar, depending on the BAT's.
My BAT's are like 65 deg Celcius. I need a Front Mount Intercooler so badly.
My BAT's are like 65 deg Celcius. I need a Front Mount Intercooler so badly.
-
- Posts: 383
- Joined: August 3rd, 2011, 11:29 am
Re: OL Maf cal
Wow!! Even when moving?
Re: OL Maf cal
This morning at 07:30 with ambient temps of around 21 Deg Celcius the BAT's where close to 50.
When driving in boost the tmic gets heatsoaked so fast that it rises to 60 very quickly.
Dont think the efficiency of my top mount is where it should be
When driving in boost the tmic gets heatsoaked so fast that it rises to 60 very quickly.
Dont think the efficiency of my top mount is where it should be
- Steve @ VersaTune
- Lead tuner
- Posts: 1157
- Joined: March 29th, 2010, 12:58 pm
Re: OL Maf cal
What's your Barometer reading?
High BAT load tables don't start to kick in till 70C by default.
High BAT load tables don't start to kick in till 70C by default.
- Steve @ VersaTune
- Lead tuner
- Posts: 1157
- Joined: March 29th, 2010, 12:58 pm
Re: OL Maf cal
That's most likely the issue.