Page 1 of 3
OL Maf cal
Posted: January 7th, 2012, 4:50 am
by Kevin
Hi guys
Just a question, Ive made 11 WOT logs to calibrate the higher voltages. Out of the 11 made Ive only found 7 voltages. Is there any easier way to do this?
Re: OL Maf cal
Posted: January 7th, 2012, 6:38 am
by skiptownmcat
What is the maximum voltage ~4.52v?
As you start to climb, the acceleration rate of the airflow slows down so the last couple of k is spread out over only a few voltages.
OL Maf cal
Posted: January 7th, 2012, 6:40 am
by Kevin
My max voltage is only 4V...
OL Maf cal
Posted: January 7th, 2012, 6:41 am
by Kevin
Im missing almost all voltages between 3 and 4
Re: OL Maf cal
Posted: January 7th, 2012, 6:45 am
by skiptownmcat
Do the log again, flat foot from 2500 rpm in 4th
OL Maf cal
Posted: January 7th, 2012, 7:46 am
by Kevin
Ive done it so many times...everytime the same result
Re: OL Maf cal
Posted: January 7th, 2012, 7:57 am
by skiptownmcat
Post a log up and I'll have a look.
OL Maf cal
Posted: January 7th, 2012, 8:02 am
by Kevin
Cool, will post my 4th gear wot logs just now
Re: OL Maf cal
Posted: January 7th, 2012, 8:10 am
by skiptownmcat
i'm at work at the minute but I'll get to them ASAP.
Re: OL Maf cal
Posted: January 7th, 2012, 8:17 am
by Kevin
Logs I made yesterday and this morning