Thanks for taking your time to look at the log. The pull was done on a slightly bent road and during a lane change. Not ideal, i know...mituc wrote: ↑February 24th, 2021, 9:08 am Your log doesn't look that good. During that 4th gear pull did you notice any wheel slip up to about 5000rpm, or was the pull done on a bent road? It looks like traction control was working a bit considering how irregularly the engine speed is increasing but I'd rather ask you if you felt anything.
I did not notice wheelslip, but there could be some slip while i crossed the white painted roadmarkings.
I was a little confused because the FRP stayed around a constant 1770psi for a while after the pressure spike of around 2020psi, while i kept letting off the acceleration pedal. FRP was going to a smaller value at around 4000rpm while engine braking in the same gear.mituc wrote: ↑February 24th, 2021, 9:08 am About the fuel rail pressure, its progression is normal and when you let off the acceleration pedal that fuel needs to go through the pressure relief valve, so you may see a short fuel rail pressure spike when that happens.
The fuel rail pressure target varies with load and RPM so it's normal to have smaller FRP values during low load or engine braking situations.
I will try to get some cleaner logs, but that will be 3th gear logs at a smooth but rather short straight road nearby.
3th gear WOT log will give also good info, right? Hope the covid curfew will end soon, so i can go make nightly wot logs (less traffic and cars with blue lights
![Cop :cop](./images/smilies/cop.gif)