Hello, new big turbo setup. Got base tune.
Posted: September 3rd, 2017, 7:39 pm
I got a base tune. But after having fuel pressure relief valve failure. I found the car to have a hesitation and I'm getting a lean at idle code. I'm in the middle of figuring this out. But what I need help with is I uploaded the base tune on mazdaspeed fourm and I'm basicly being told the base tune sucks bad!!!. The guy I got it from said it was basicly a ap stage 2 map converted to versatuner. I need to use the base tune until january. But by they way they are talking I need to change a few things to be able to safely do that. Can one of you guys just have a look and help me out with what to fix. I know I need a tune but I can't afford it right now. I got this base map and it drove good until the fuel pressure relief valve issue. But after talking to the dude that looled at it. I'm a little worried. I'm not asking it to be fixed for me (tho that would be amazing)... just looking for a what to change. And what am i changing it to... I really appreciate the help
Current setup:
Sure Thermal Gaskets - DM Stage 3 Dual OCC'S - DM Pcv Vent Plate - BNR S4 V2 - Guardian Angel - Grimmspeed EBCS - JBR Egr Delete - Turbosmart Dual Port BOV(100% To Air) - HTP 3.5" Full Intake W/Recir. Hose Blocked - Bosch 3.5 Bar Map - Autotech HPFP - CX Racing FMIC Pipe Kit W/ Tr6 Core FMIC - One Step Colder Denso Plugs
Current setup:
Sure Thermal Gaskets - DM Stage 3 Dual OCC'S - DM Pcv Vent Plate - BNR S4 V2 - Guardian Angel - Grimmspeed EBCS - JBR Egr Delete - Turbosmart Dual Port BOV(100% To Air) - HTP 3.5" Full Intake W/Recir. Hose Blocked - Bosch 3.5 Bar Map - Autotech HPFP - CX Racing FMIC Pipe Kit W/ Tr6 Core FMIC - One Step Colder Denso Plugs