another new member here from the UK MPS Owners' Club saying Hi
looking forward to educating myself on the mysterious art of tuning when my software turns up
New UK member
-
- Posts: 71
- Joined: November 6th, 2011, 9:25 am
- Location: Scotland
Re: New UK member
Welcome aboard
Do you have your cable? You have to go tactrix website for a download first....
Sure you'll love it, don't be shy and go for the high load map first off I'd say
Do you have your cable? You have to go tactrix website for a download first....
Sure you'll love it, don't be shy and go for the high load map first off I'd say
BNR stage1, 3" Downpipe w/200 cell, Autotech HPFP, Cpe TMIC, Cpe 3" SRI, HTP 3" tip, Amsoil filter w/Prefilter, GoFastBits BOV, Grimmspeed interrupt, NGK iridium IX, Snow Stage 2 meth w/Aquamist parts, Sure Juggernaught, Cpe diff brace.
-
- Posts: 383
- Joined: August 3rd, 2011, 11:29 am
Re: New UK member
Good advice, high load and a maf cal then turn everything up a notch!!kevstewart wrote:Welcome aboard
Do you have your cable? You have to go tactrix website for a download first....
Sure you'll love it, don't be shy and go for the high load map first off I'd say
Re: New UK member
it's like a home from home on here
I've got the Tactrix cable already - so I need to download the drivers from their site first?
and I also have a question about the os on my netbook. it's running XP SP2 - do I need to to install SP3 or should I install windows 7 instead?
it's just a stripped out netbook that's going to be used purely for tuning
I've got the Tactrix cable already - so I need to download the drivers from their site first?
and I also have a question about the os on my netbook. it's running XP SP2 - do I need to to install SP3 or should I install windows 7 instead?
it's just a stripped out netbook that's going to be used purely for tuning
- Steve @ VersaTune
- Lead tuner
- Posts: 1157
- Joined: March 29th, 2010, 12:58 pm
Re: New UK member
I use XP SP3 with no problems. Ugnius may be able to say whether there will be any issues with SP2. Give it a go.
-
- Posts: 71
- Joined: November 6th, 2011, 9:25 am
- Location: Scotland
Re: New UK member
Download this: http://www.tactrix.com/index.php?option ... &Itemid=61
BNR stage1, 3" Downpipe w/200 cell, Autotech HPFP, Cpe TMIC, Cpe 3" SRI, HTP 3" tip, Amsoil filter w/Prefilter, GoFastBits BOV, Grimmspeed interrupt, NGK iridium IX, Snow Stage 2 meth w/Aquamist parts, Sure Juggernaught, Cpe diff brace.
Re: New UK member
well I installed the high load map a couple of days ago and after 50+ miles everything seems to be settling in nicely
I haven't been monitoring anything or making any logs yet, but hope to start this weekend if the weather gets a bit better
I'm still trying to get my head around the whole maf calibration thing
I haven't been monitoring anything or making any logs yet, but hope to start this weekend if the weather gets a bit better
I'm still trying to get my head around the whole maf calibration thing
-
- Posts: 71
- Joined: November 6th, 2011, 9:25 am
- Location: Scotland
Re: New UK member
You been for a blast yet?
BNR stage1, 3" Downpipe w/200 cell, Autotech HPFP, Cpe TMIC, Cpe 3" SRI, HTP 3" tip, Amsoil filter w/Prefilter, GoFastBits BOV, Grimmspeed interrupt, NGK iridium IX, Snow Stage 2 meth w/Aquamist parts, Sure Juggernaught, Cpe diff brace.
-
- Posts: 383
- Joined: August 3rd, 2011, 11:29 am
Re: New UK member
It's a head blag at first, but once you've done it once it becomes easy. If you're struggling, let us know.Col wrote:well I installed the high load map a couple of days ago and after 50+ miles everything seems to be settling in nicely
I haven't been monitoring anything or making any logs yet, but hope to start this weekend if the weather gets a bit better
I'm still trying to get my head around the whole maf calibration thing
Re: New UK member
I went for a blast last night mate... pretty impressivekevstewart wrote:You been for a blast yet?
it definitely feels better than the Hypertech - power delivery is much more linear and smooth
I like