another UK member from http://www.mpsowners.co.uk joining
i have just ordered both my cable and software so will be tuning as soon as they arrive
i am currently running with these mods on my mps6:
Forge recirc valve, Corksport SRi & TIP, AEM Filter, cp-e REM, J-Speed SSP, DO LUCK brake lines, Dashhawk, 3" CBE, D1 Spec OCC, DNP tubular manifold, JBR heavy shifter kit, ITV22
last dyno`d at 287.7bhp & 306.1lbft
future mods:
corksport fmic, corksport DP with HFcat, autotech internals and possibly stage 2 BNR too
UK member
- Steve @ VersaTune
- Lead tuner
- Posts: 1157
- Joined: March 29th, 2010, 12:58 pm
Re: UK member
Welcome Aboard!!
You'll definitely want to tweak the Base tune to prevent boost spikes with your free intake and flow exhaust.
You'll definitely want to tweak the Base tune to prevent boost spikes with your free intake and flow exhaust.
-
- Posts: 71
- Joined: November 6th, 2011, 9:25 am
- Location: Scotland
Re: UK member
Welcome aboard Dougie, us UK members are taking over
BNR stage1, 3" Downpipe w/200 cell, Autotech HPFP, Cpe TMIC, Cpe 3" SRI, HTP 3" tip, Amsoil filter w/Prefilter, GoFastBits BOV, Grimmspeed interrupt, NGK iridium IX, Snow Stage 2 meth w/Aquamist parts, Sure Juggernaught, Cpe diff brace.
-
- Posts: 11
- Joined: December 30th, 2011, 12:14 pm
- Location: scotland
Re: UK member
thanks for the welcome
i will defo be having a play about when i get up and running...and there will be plenty of questions too
how many are there here now including me? 5
i will defo be having a play about when i get up and running...and there will be plenty of questions too
how many are there here now including me? 5
-
- Posts: 15
- Joined: November 24th, 2011, 10:11 am
Re: UK member
welcome mate! nice to see you there
-
- Posts: 11
- Joined: December 30th, 2011, 12:14 pm
- Location: scotland
Re: UK member
just ordered my FMIC and will also be running new grimmspeed ebcs, downpipe and decat
just got the pump internals to get and thats me fully ready to go
just got the pump internals to get and thats me fully ready to go
-
- Posts: 71
- Joined: November 6th, 2011, 9:25 am
- Location: Scotland
Re: UK member
Think it's 7 from MPSOC....
Me, you, JUT, skiptowncat, tranceporter, col and Dolf got it too
Me, you, JUT, skiptowncat, tranceporter, col and Dolf got it too
BNR stage1, 3" Downpipe w/200 cell, Autotech HPFP, Cpe TMIC, Cpe 3" SRI, HTP 3" tip, Amsoil filter w/Prefilter, GoFastBits BOV, Grimmspeed interrupt, NGK iridium IX, Snow Stage 2 meth w/Aquamist parts, Sure Juggernaught, Cpe diff brace.
-
- Posts: 11
- Joined: December 30th, 2011, 12:14 pm
- Location: scotland
Re: UK member
well got my versatune software today
just having a look through it as my cable still isnt here yet.
what should i do first when installing to my car?
how do you set up the launch control with no lift shift??
just having a look through it as my cable still isnt here yet.
what should i do first when installing to my car?
how do you set up the launch control with no lift shift??
Re: UK member
The launch control and no lift shift options come up just before you flash a map to the car. The first thing to carry out when installed is a MAF calibration mate.Dougie6488 wrote:well got my versatune software today
just having a look through it as my cable still isnt here yet.
what should i do first when installing to my car?
how do you set up the launch control with no lift shift??
- Steve @ VersaTune
- Lead tuner
- Posts: 1157
- Joined: March 29th, 2010, 12:58 pm