GT 28 HYBRID

Discussion of tuning specific to MAZDASPEED6/MAZDASPEED Atenza/Mazda 6 MPS vehicles
Post Reply
Ricardo_yen
Posts: 28
Joined: March 30th, 2012, 2:00 am

GT 28 HYBRID

Post by Ricardo_yen »

@ mituc and Steve

I had all the hardware installed, so i was itching to take it for a spin, which i did, logged it with the dash daq, without doing the maf cals,

am busy doing my maf cals rite now, but in the mean time, are there any comments on the logs attached :cry
Attachments
logs.zip
load 1.95, boost 1.1, fuel pressure 12.7, afr .78
(58.97 KiB) Downloaded 413 times
mituc
VersaTuner guru
Posts: 1328
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: GT 28 HYBRID

Post by mituc »

The logs look good so far but please make an effort and log with the versatuner. The dashdaq has the BAT values 32 degrees Celsius lower than real, the MAF V is scrambled, and since a while ago I think they've also fucked up the logging resolution (just look at how abrupt the RPM is varying).
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Post Reply