Page 1 of 1
Accel/Decel Load Multiplier Tables
Posted: June 18th, 2020, 3:31 pm
by Lolmooses
Can someone explain how these work? Does the multiplier apply for the entire time your accelerating or for a short time after accelerating to help prevent overshooting the load target?
Re: Accel/Decel Load Multiplier Tables
Posted: June 18th, 2020, 5:59 pm
by mituc
Lolmooses wrote: ↑June 18th, 2020, 3:31 pm
Can someone explain how these work? Does the multiplier apply for the entire time your accelerating or for a short time after accelerating to help prevent overshooting the load target?
Those multipliers apply for a short period of time after shifting from one gear to another to prevent stressing the clutch and gearbox. I'd leave them to stock values.
Re: Accel/Decel Load Multiplier Tables
Posted: June 19th, 2020, 12:09 am
by Lolmooses
Ok will do. I noticed during two pulls where one had the multiplier tables changed to reduce load that the load was missing it's target by 1 point for the entire pull. I suspected the multiplier was being applied across the whole pull but if it's just for a short time then it's my BCS DC that needs work.