Hi,
I don't know why but it is like it is. When I remove versatune than it's like I wrote above. It's not a problem but I would like to know why it's like that
EGR P0401 insufficient flow after flashing Base US93/EU98 map
Re: EGR P0401 insufficient flow after flashing Base US93/EU98 map
Ok, please load this logging preset: https://www.dropbox.com/s/4sru1ehbdb851 ... vtpre?dl=0
...and take logs when starting the car (so start the logging before starting the engine) and let the car idle for 2-3 minutes and log all this.
Repeat this with versatuner on (also let me know what tune you put on) and with the car fully returned to stock.
...and take logs when starting the car (so start the logging before starting the engine) and let the car idle for 2-3 minutes and log all this.
Repeat this with versatuner on (also let me know what tune you put on) and with the car fully returned to stock.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Re: EGR P0401 insufficient flow after flashing Base US93/EU98 map
Hey,
Okay I will do this. But I have to wait until it's a little bit warmer outside. At Winter temperatures the Coldstart RPM are in general lower.
Greets
Okay I will do this. But I have to wait until it's a little bit warmer outside. At Winter temperatures the Coldstart RPM are in general lower.
Greets
Re: EGR P0401 insufficient flow after flashing Base US93/EU98 map
I see, so you may indeed have to clean the throttle body...
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP