VersaTune User Forum

I'll be installing a bunch of fast bits onto my Gen2 this weekend. The mostly comprehensive list is as follows:

• HPFP

• 3" Intake

• Upgraded CPe Intercooler

• Catted CPe Downpipe

• Maybe EBCS, if I get the fittings in on time

I had planned on throwing on a 'base tune' that mostly covered what I was installing, but the ones I can see listed don't include an aftermarket catted downpipe. They all say "stock DP required." I was hoping someone here might have a tune they've done for a similar parts list that I could start off with, and continue to MAF Cal/log/tweak/update from there.

TIA!

What 3" intake you have?
What EBCS do you have and how do you plan to set it up: 3port or bleed/2port?
Is your versatuner the full version?
What gas are you using?

I don't know why, but I didn't see this reply, so first thank you for replying so quick despite my own reply being late af. I'll answer your questions below:

What 3" intake you have?

JBR All-Aluminum 3" intake

What EBCS do you have and how do you plan to set it up: 3port or bleed/2port?

I have a MAC35 EBCS and can set it up in 2 or 3-port, whichever is better/easier. Haven't hooked it up yet.

Is your versatuner the full version?

Yes.

What gas are you using?

I'm running on 93octane (North American) now with the 93 high-load map for the stock downpipe.

I don't have the HF DP installed yet, nor the EBCS. I will be installing it in a couple weeks, and would like to have a tune ready to go when I do!

Anyway, thanks again for the effort, it's appreciated.

Here it is. Your setup requires some logging to make sure it's all good and if everything looks ok you will be able to extract a bit more performance out of it.

This is amazing.... Thank you!! I will do some logs and such once it's all back together. This is a huge help, thanks!!