tune selection question # 2
-
- Posts: 6
- Joined: December 31st, 2021, 1:45 pm
Re: tune selection question # 2
Thanks a lot the hose from the wastegate to the BCS was kink under the inlet hose. First i reduced the BCS DC Base, i bring it 2% over the OTS 91 Tune to follow my target load. I also pulled back the target load instead of 2.35 at 4000rpm i put it at 2.2. For the WOT afr passed 5000rpm i put back to 10.xishh and i will see what gonna be the effect on the HP\TQ curve and knock. I'll be back with another log thanks again @mituc