tune selection question # 2

Tuning discussion for all second generation Mazda 2.3 MZR DISI Turbo powered vehicles
Jensensmith
Posts: 6
Joined: December 31st, 2021, 1:45 pm

Re: tune selection question # 2

Post by Jensensmith »

Thanks a lot :bow the hose from the wastegate to the BCS was kink under the inlet hose. First i reduced the BCS DC Base, i bring it 2% over the OTS 91 Tune to follow my target load. I also pulled back the target load instead of 2.35 at 4000rpm i put it at 2.2. For the WOT afr passed 5000rpm i put back to 10.xishh and i will see what gonna be the effect on the HP\TQ curve and knock. I'll be back with another log thanks again @mituc :thumbup
2013 Mazdaspeed3
K04 Turbo/TurboSmart BOV/Injen CAI/TIP/AutotechHPFP/Catted DP+Straight Pipe/EgrDelete

Tuned with Image by Image
Post Reply