Re: tune selection question # 2
Posted: April 23rd, 2022, 11:23 am
Thanks a lot 
the hose from the wastegate to the BCS was kink under the inlet hose. First i reduced the BCS DC Base, i bring it 2% over the OTS 91 Tune to follow my target load. I also pulled back the target load instead of 2.35 at 4000rpm i put it at 2.2. For the WOT afr passed 5000rpm i put back to 10.xishh and i will see what gonna be the effect on the HP\TQ curve and knock. I'll be back with another log thanks again @mituc 
the hose from the wastegate to the BCS was kink under the inlet hose. First i reduced the BCS DC Base, i bring it 2% over the OTS 91 Tune to follow my target load. I also pulled back the target load instead of 2.35 at 4000rpm i put it at 2.2. For the WOT afr passed 5000rpm i put back to 10.xishh and i will see what gonna be the effect on the HP\TQ curve and knock. I'll be back with another log thanks again @mituc