Hello.
Is there any way to adjust the throttle respond.
Trying to eliminate a bit of legging.
Cutless high flow DP, HPFP, BOV, SHOR RAM INTAKE.
CHEERS.
Throttle respond
Throttle respond
2013 MS3 , MODS; CS HPFP INTERNAL; CS SRI; CATLESS DP; RACE PIPE; BOV 
Re: Throttle respond
There are several ways to eliminate throttle response depending on what is causing most of it.
In your case considering the mods you have the throttle response should actually be close to out of control anywhere from 2200-2500rpm up. So post a log using this logging preset: https://www.dropbox.com/s/rznsz9p17ma4i ... vtpre?dl=0 Please capture the moment when you press the acceleration and you wish you had more pedal, so a few seconds per log. Take 3-4 logs. Also take two logs two minutes log each with the car idling and driving normally through traffic. Post the .zip archive here and let's start from there.
In your case considering the mods you have the throttle response should actually be close to out of control anywhere from 2200-2500rpm up. So post a log using this logging preset: https://www.dropbox.com/s/rznsz9p17ma4i ... vtpre?dl=0 Please capture the moment when you press the acceleration and you wish you had more pedal, so a few seconds per log. Take 3-4 logs. Also take two logs two minutes log each with the car idling and driving normally through traffic. Post the .zip archive here and let's start from there.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~550BHP @35PSI
2008 Icy Blue Mazda CX7
Built engine and stock exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 360-ish BHP
Built engine + WMI + GTX3071 gen2, ~550BHP @35PSI
2008 Icy Blue Mazda CX7
Built engine and stock exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 360-ish BHP
Re: Throttle respond
Alrigh. i do some logs and lets go from there.
thanks mituc
thanks mituc
2013 MS3 , MODS; CS HPFP INTERNAL; CS SRI; CATLESS DP; RACE PIPE; BOV