Launch Control and No Lift Shift Added

VersaTuner for Mazda RX-8
Post Reply
User avatar
Steve @ VersaTune
Lead tuner
Posts: 1157
Joined: March 29th, 2010, 12:58 pm

Launch Control and No Lift Shift Added

Post by Steve @ VersaTune »

We have added Launch Control and No Lift Shift to VersaTuner for Series II Mazda RX-8.

You can set the Accelerator Pedal Position and Vehicle Speed thresholds for the launch control RPM limit and set a separate RPM limit for no-lift shift.

So, you get one limiter for launch, another for normal driving, and a third limiter for shifting with the accelerator pedal floored.

Enjoy!
Nelson S
Posts: 2
Joined: September 17th, 2019, 5:58 am

Re: Launch Control and No Lift Shift Added

Post by Nelson S »

Steve,
Where are these Launch control and no lift shift features at in the software on the SII RX8 ? is it the Rev limit Unknow tables ?
User avatar
Ugnius @ VersaTune
Lead developer
Posts: 580
Joined: March 19th, 2010, 11:57 am

Re: Launch Control and No Lift Shift Added

Post by Ugnius @ VersaTune »

You can find launch control and no lift shift settings in the Tune Customizer settings:
LCNLS.png
LCNLS.png (171.28 KiB) Viewed 7076 times
They are available for manual transmission vehicles only.
Nelson S
Posts: 2
Joined: September 17th, 2019, 5:58 am

Re: Launch Control and No Lift Shift Added

Post by Nelson S »

That works , Thank you Steve
justinnnog
Posts: 1
Joined: May 10th, 2021, 3:41 am

Re: Launch Control and No Lift Shift Added

Post by justinnnog »

I have versatuner installed and have the full program but on the tune editor I cannot see the settings that have launch control I only see disable immobilizer.
Post Reply