Maximum Operating Load - stuck

[Ugnius @ VersaTune]

We could allow changing the multiplier. If you double it, you would be able to specify loads up to 4.0 at the expense of lower granularity.

[Themainmandan]

So it’s impossible to get the absolute load to the maximum of 4? What happens when I supercharge my engine?

At load 2 you should be well above 400bhp, so I'd struggle to get there first
The factory ECU may have some limitations which is the reason why people go stand-alone ECU with the extreme builds. However the Mazdaspeed platform supports 1000+bhp on the factory ECU but that one was designed for turbocharged applications from the get-go.

Gotcha thanks for that, I think I’m tracing my fuel cut to a bad ground anyways..


Sent from my iPhone using Tapatalk

[Themainmandan]

We could allow changing the multiplier. If you double it, you would be able to specify loads up to 4.0 at the expense of lower granularity.

That’s good to know! Thanks. I’m tracing down and resolving some other issues.. I’ll be gentle when charging my engine in the next few months lol I’m sure it’ll be fine if others have been ok


Sent from my iPhone using Tapatalk