Hi guys !
Do you know what board I should modify in "ignition" to get some "pop and bangs"?
Cheers.
Crackles and bang
-
- Posts: 12
- Joined: March 1st, 2020, 8:00 am
Re: Crackles and bang
Lead timing 1 table:
Load column = 0.125
-20 across the full rpm range
Trailing timing 1 table:
Load column = 0.125
-25 across the full rpm range
You'll still have to play with the throttle when in gear decelerating to hit that engine load range though.
Load column = 0.125
-20 across the full rpm range
Trailing timing 1 table:
Load column = 0.125
-25 across the full rpm range
You'll still have to play with the throttle when in gear decelerating to hit that engine load range though.