flame tune

Tuning discussion for all first generation Mazda RX-8 (2004-2008)
McTinkerson
Posts: 12
Joined: March 1st, 2020, 8:00 am

Re: flame tune

Post by McTinkerson »

fgeile wrote: August 13th, 2020, 7:14 pm Has anyone actually ran that tune with the -25 degrees of ignition timing, if so how "safe" is it for a rotary and do you have a video of it in action. I'm pretty new to tuning but I've played around enough to get an idea of safe parameters, -25 degrees of ignition timing seems super excessive to me.
I'm running it. Realistically, it's stupid and dumb and totally pointless.
It's more of a proof of concept to aid in figuring out the DFCO table issues. The o2 sensor temperature went up by about 10%, so there's extra heat for sure (which is never good for the side seals).
I've revised it a few times to only be "active" above 5000rpm.

https://youtu.be/m9QZCT3WXCw
AMiR
Posts: 11
Joined: June 4th, 2020, 4:06 am

Re: flame tune

Post by AMiR »

McTinkerson wrote: August 19th, 2020, 5:50 am
fgeile wrote: August 13th, 2020, 7:14 pm Has anyone actually ran that tune with the -25 degrees of ignition timing, if so how "safe" is it for a rotary and do you have a video of it in action. I'm pretty new to tuning but I've played around enough to get an idea of safe parameters, -25 degrees of ignition timing seems super excessive to me.
I'm running it. Realistically, it's stupid and dumb and totally pointless.
It's more of a proof of concept to aid in figuring out the DFCO table issues. The o2 sensor temperature went up by about 10%, so there's extra heat for sure (which is never good for the side seals).
I've revised it a few times to only be "active" above 5000rpm.

https://youtu.be/m9QZCT3WXCw
So do you think we should not do this at all or try this method?
McTinkerson
Posts: 12
Joined: March 1st, 2020, 8:00 am

Re: flame tune

Post by McTinkerson »

AMiR wrote: August 25th, 2020, 11:06 am
So do you think we should not do this at all or try this method?
This is squarely in the "if you have to ask, you shouldn't do it".
AMiR
Posts: 11
Joined: June 4th, 2020, 4:06 am

Re: flame tune

Post by AMiR »

McTinkerson wrote: August 28th, 2020, 4:29 am
AMiR wrote: August 25th, 2020, 11:06 am
So do you think we should not do this at all or try this method?
This is squarely in the "if you have to ask, you shouldn't do it".
:banghead :banghead :banghead
Themainmandan
Posts: 30
Joined: October 20th, 2019, 12:15 pm

Re: flame tune

Post by Themainmandan »

I’ve been running it for the past 6 months or so and it’s been fine. Haven’t noticed higher temps or anything.. that being said I don’t try to do it every second I’m driving like a kid in high school lol (I only act like that once in a while) but yes, it is fine and haven’t noticed any issues whatsoever, but my engine is majorly ported and I’m running treated rx7 seals among many other mods.. not sure if that makes a difference.


Sent from my iPhone using Tapatalk
Themainmandan
Posts: 30
Joined: October 20th, 2019, 12:15 pm

Re: flame tune

Post by Themainmandan »

Ugnius @ VersaTune wrote:
Themainmandan wrote:Can you elaborate a bit? What can we do in which table(s) to achieve this? Also, is VersaTune working on giving us a fuel sustain on deceleration option?

Thanks
Yes, we are working on that. Crackles and pops will come to RX-8, too.
Will this update be posted on this forum or should I be checking on a website somewhere? Sorry I’ve been so busy I have no clue if it’s out already or not haha

I realllllly want a decel ignition cut featureeee!!!ImageImageImageImage


Sent from my iPhone using Tapatalk
AMiR
Posts: 11
Joined: June 4th, 2020, 4:06 am

Re: flame tune

Post by AMiR »

Can anyone share the Flame or pop and bangs tuning file with us? :bow
Capt.Tightpants
Posts: 3
Joined: January 15th, 2021, 11:49 am

Re: flame tune

Post by Capt.Tightpants »

Ugnius @ VersaTune wrote: April 2nd, 2020, 2:55 am
Themainmandan wrote:Can you elaborate a bit? What can we do in which table(s) to achieve this? Also, is VersaTune working on giving us a fuel sustain on deceleration option?

Thanks
Yes, we are working on that. Crackles and pops will come to RX-8, too.
Any updates?
dcox11b
Posts: 25
Joined: March 9th, 2021, 1:28 pm
Location: USA
Contact:

Re: flame tune

Post by dcox11b »

If you would like a flame tune/crackles and pops please send me a private message. This will only work on 6 port (manuals) out of the box. You can probably edit it for your specific car if you want but that's squarely on you.
2005 Rx8 Shinka - Black Cherry Mica
Samwell
Posts: 1
Joined: March 25th, 2021, 3:12 pm

Re: flame tune

Post by Samwell »

Please message me with info on this!
Post Reply