Throttle relative position
Throttle relative position
Hi can anyone explain the throttle relative position table, I notice 84 % is the máx value does this mean rx8 never goes full wot?
-
- Posts: 12
- Joined: March 1st, 2020, 8:00 am
Re: Throttle relative position
The unit for that table is not really a percentage. Since the RX-8 is drive by wire, it's the stepper motor control value (as pulse width I *think*).
Just like the OMP control.
So 84 is 100%, 42 = 50%, etc.
Just like the OMP control.
So 84 is 100%, 42 = 50%, etc.
Re: Throttle relative position
Hopefully someone can help. I have accelerator pedal position @ 100%, Desired throttle position @ 100% and Relative throttle position @ 67.1%. This was with two different throttle bodies thinking that one of them might have been bad. Is relative throttle position @ 67% normal? the actual throttle looks like it opens all the way but this here confusing me.
- Ugnius @ VersaTune
- Lead developer
- Posts: 636
- Joined: March 19th, 2010, 11:57 am
Re: Throttle relative position
What car is that? It is normal. You will not see 100%, because the position sensor cannot reach that. You are seeing the max value reported by the throttle position sensor. The ECU knows that.Far2good wrote: ↑September 18th, 2020, 10:32 am Hopefully someone can help. I have accelerator pedal position @ 100%, Desired throttle position @ 100% and Relative throttle position @ 67.1%. This was with two different throttle bodies thinking that one of them might have been bad. Is relative throttle position @ 67% normal? the actual throttle looks like it opens all the way but this here confusing me.